Testing industrial assets operating at extreme high temperatures, such as process pipelines, storage tanks, and pressure vessels, has always been a challenge. Traditionally, equipment must be shut down for cooling before non-destructive testing (NDT) can be performed. This leads to extended downtime, increased maintenance costs, and limited repair planning time.

High temperature HSMT FlexThe scanner has changed this process. This scanner is designed specifically for ultrasonic weld detection in high-temperature environments and can detect up to350°CReliable detection of the surface. By implementing in operation detection, this device helps operators minimize downtime, improve efficiency, and ensure safety as much as possible.

Reduce the cost of high-temperature asset testing

In industries such as oil and gas, power generation, or chemical, every hour of downtime can result in huge losses. The traditional inspection conducted after the equipment has cooled down often detects defects too late, leading to unplanned downtime for maintenance and causing more losses.

High temperature HSMT Flex scanner passes throughBefore the shutdown is completedImplement testing to address this issue. Defects can be detected earlier, allowing the maintenance team to develop repair plans in advance. Result: Reduced downtime, lower costs, and more predictable maintenance plans.

Minimize downtime and improve efficiency as much as possible

By implementing high-temperature surface detection, the HSMT Flex scanner brings multiple operational advantages:

• Early detection of defects——The problem can be detected before stopping the machine.

• Maintenance strategies can be pre planned——The team can allocate resources more efficiently and arrange repairs.

• Reduced downtime——The detection delay will no longer extend the shutdown period.

This proactive strategy simultaneously improves efficiency and safety, making it easier to balance equipment reliability and operational needs.

Reliable high-temperature scanning performance

HSMT Flex scanner is designed specifically for high temperature environments:

Continuous scanning temperature up to 350 ° C

The basic configuration supports scanning on extremely high temperature surfaces, enabling online detection without waiting for cooling.

ScanDeck module achieves enhanced performance

equipScanDeck moduleAfterwards, the scannerCan be on surfaces up to 300 ° CPerform continuous scanning.

Heat-resistant components

• Metal rollerCan withstand direct contact with high-temperature surfaces.

• Radiation protection componentsCan protect critical scanner components.

• Cable and sheathCan withstand short-term surface contact without damage.

The sturdy structure ensures stable and safe testing under harsh working conditions.

Breaking through the difficulties of high-temperature non-destructive testing

When lacking high-temperature scanning capability, detection usually requires:

1. Turn off the device.

2. Wait for the device to cool down.

3. Conduct testing.

4. Plan and complete necessary maintenance work.

This process will greatly prolong equipment downtime.High temperature HSMT Flex scannerSupport the detection of high-temperature equipment to eliminate unnecessary waiting time. Operators can detect problems earlier and solve them more efficiently, ultimately improving safety and reliability.

A scanner that combines safety and efficiency

The upgraded HSMT Flex scanner provides a mature solution for reducing maintenance costs of high-temperature equipment. The deviceCan perform safer and more reliable non-destructive testing (NDT) in environments up to 350 ° CAssist the testing team in minimizing downtime, improving efficiency, and ensuring the smooth operation of critical equipment.

For industries where safety and runtime cannot be compromised, HSMT Flex scanners have demonstrated strong advantages in the field of high-temperature non-destructive testing.