Cement soil mixer

According to the provisions of JGJ/T233-2011 "Design Specification for Cement Soil Mix Proportion", the cement soil mixer is used to mix the cement soil raw materials according to the design ratio for indoor testing requirements. It is used for unconfined compressive strength, compression, shear, permeability, standard penetration tests, and on-site core testing of cement soil.Technical parameters of cement soil special mixer:Blender form: planetary blender,Speed 100-460r/min (stepless speed regulation)Mixing capacity: 20L.Power supply voltage: 380VMixing of the sampleCement soil with the same mix ratio should be sampled from the same mixing pot, and the amount of each mixing should not be less than 1% of the mixing pot volume/Before feeding, wet the mixing pot first, weigh the representative soil sample according to the mixing ratio, and put it into the mixing pot for even mixing.According to the cement mixing ratio and the water cement ratio of the cement slurry, weigh the corresponding cement and water to prepare a cement slurry.Add the prepared cement slurry (powder) to the soil sample and stir until it is evenly mixed. The mixing time should not be less than 10 minutes and should not exceed 20 minutes.