JB300DHigh-speed disperser

This machine is used for testing formulas, color matching, scientific research, and micro production. Specially designed and manufactured for laboratory use. The mechanical structure is simple, the operation is smooth, the use is flexible, and there is no infinite speed change. It is mainly used for low-speed mixing and stirring of various liquids and solid powders with different viscosities, as well as high-speed dispersion and dissolution of experimental machinery. The materials are rotated by specially designed blades at various speeds to produce shear cutting, which rapidly disperses the aggregates, thereby achieving dissolution, emulsification, homogenization, high quality, fast efficiency, and wide application fields.

This machine is a desktop and does not require special installation. When in use, it can be placed flat on a workbench or office desk to work. It must be placed steadily to avoid vibration at high speeds. The lifting and lowering are screw type, and the motor bracket handle must be locked before speed regulation. Before lifting and lowering, the locking handle must be released and connected220VTurn on the switch and strictly prohibit high-speed operation without materials during speed regulation. When dispersing materials, special attention should be paid: slowly adjust from low speed to high speed until reaching the appropriate speed to avoid material flying and affecting the dispersion effect.

1.Fast and stable rotation speed, good dispersion and mixing effect;
2.Various dispersing and stirring impellers can be optionally selected, as well as customized explosion-proof performance;
3.Speed digital display for easy data recording;
4.Optional container with jacket;

5，Can adapt to different experimental needs in the laboratory, and can directly calculate the relationship between the linear velocity of the stirring, dispersing, and sanding blade discs and the viscosity and chemical reaction rate of the materials based on the displayed shaft speed, providing correct data for batch production. The machine adopts a series excited rectifier motor, and through an intelligent motor speed control instrument, the motor is infinitely variable and digital is appliedPIDTechnology, high control accuracy,

2、 Main technologies:

1.Motor power1100w
2.Voltage:220V，50Hz, or according to customer requirements
3.Speed range:0-8000r/min
4.Processing capacity:1000-5000ml(Using water as a medium)
5.Dispersion disk diameter:50-80mm
6.Lifting and lowering stroke:300mm
3、 Structure

1This machine adopts a series rectifier motor, which is controlled by an intelligent motor speed controller to achieve continuously variable speed and apply digital technology to the motorPIDTechnology, high control accuracy, direct digital display, spindle speed.

2The spindle motor lifting adopts a dual axis constant force guiding design, with a novel structure and easy operation. The frame column is a single piece310*50*50mmSteel counterweight, which plays a stabilizing role in the lifting and lowering of the spindle motor and equipment distribution.

3The material barrel and frame are positioned using a bracket structure. The cylinder is of the inner and outer jacket type, which can be cooled by water and is made of stainless steel material.

4The lower end of the material cylinder is the discharge system, which consists of a filter screen, a sealing ring, and a discharge valve. If the system needs to be cleaned, remove the flange bolt on the discharge valve surface, remove the discharge valve, and the discharge system will be fully cleaned.