Super New Chip launches in July | New upgrade of high vacuum leak detector

Super new chip is new

High vacuum leak detector 2.0

01Product Introduction

The high vacuum leak detector is an important supporting equipment of the transmission electron microscope in-situ system. During each in-situ experiment, it must undergo a leak detection test by the high vacuum leak detector to ensure the sealing state of the in-situ sample rod and in-situ chip, and prevent damage to the electron microscope. Therefore, the reliability of high vacuum leak detectors and the time required for a single leak detection are important factors that affect customer experience. Chaoxinxin Technology adheres to the concept of customer first and continuously iterates and upgrades its products. I hope that customers can not only make good use of the in-situ system, but also hope that the in-situ system will become better and better.

02Design optimization：After continuous design optimization, the Chaoxinxin high vacuum leak detector has reached version 2.0, with improved leak detection time and extreme vacuum performance.

① Leak detection time reduction: reaching 4.6 × 10-6hPa， Reduce time consumption by 30%; Reaching 1.0 × 10-6hPa， Reduce time consumption by 50%.

(Test data sourced from Super New Chip LAB, @ 26 ℃)

② Extreme vacuum enhancement: continuous operation for 20 hours, vacuum value~10-8hPa， The vacuum value increases by an order of magnitude within the same testing time.

(Test data sourced from Super New Chip LAB, @ 26 ℃)

Configuration List