UV radiometeryesUV aging test chamberThe irradiance measurement and display instrument consists of two parts: a metering probe and a display unit, which are connected through signal cables using plugs and sockets. The display unit has a power switch, function buttons, and a digital communication structure (USB), and the digital communication interface can provide redundant power supply for this instrument.

UV radiometerIt is a broadband power measuring instrument, mainly used to measure the radiation power density of ultraviolet radiation, that is, the radiation power per square centimeter. The ultraviolet irradiance meter has the characteristics of compact structure, good stability, and little influence from visible light. Widely used in UV radiation measurement in fields such as UV light sources, disinfection and sterilization, photomedical treatment, aging, non-destructive testing, photolithography, photopolymerization, breeding, plant cultivation, and evaluation of UV index under sunlight. Users can choose different wavelength bands of ultraviolet detectors according to their needs.

The unit is microwatts per square centimeter (μ W/cm2), and the detector is located at the front end of the instrument, making it easy to use, fast, and reliable for measurement.

1. Measurement accuracy: ± (4% FS+2digit) FS: Full scale
2. Spectral response, 260nm-380nm, center wavelength 365nm
3. Range: × 1 (0-1999 uW/cm2); 10 (2000-19990 uW/cm2, display value multiplied by 10)
4. Dimensions: 125mm in length, 68mm in width, and 22mm in height
5. The weight of the instrument is about 110 grams
6. The battery is a standard 9V alkaline battery, model: 6F22