Close the windows of the converter without any worries! Gewu YouxinConverter mouth flameanalysissystem，Assist in intelligent converter blowing and refining

In the converter steelmaking process,Due to the high temperature inside the furnace, traditional furnace fire monitoring is usually indirectly judged by workers based on the flame changes at the furnace mouth.There is news thatThe converter blowing process in the steel plantabout toImplement closed window blowing and refining,Translate into EnglishSay goodbye to the traditional steelmaking mode of observing flames through observation windows,This requirement willFurther accelerate the standardization process of converter operations.Previously, multiple steel mills have introducedGewu Youxin Converter Mouth Flame Analysis SystemBefore the requirement for closed window blowing and refining, the intelligent upgrade of the converter's fire monitoring system was completed in advance,Compared to traditional methodsThe remote fire monitoring implemented by the system is more intelligent, efficient, and secure.

Traditional converter fire inspection requiresLong term close range "fire watching operation"，Due to the severe impact of high temperature environment, not only is the efficiency low,even moreThere are certain security risks. With the higher requirements of intrinsic safety for safety protection standards, the main control room of the converter must be a solid wall facing the converter wall, that is, the observation window must be closed. Therefore, regarding the converterthese situationsThe remote fire monitoring system appears to beincreasinglyimportant.

The main function of the Gewu Youxin converter mouth flame analysis system is to remotely observe the flame. Real time flame images of the converter mouth are obtained through a high-definition camera and presented in the client software. The system is connected to the PLC signal of the converter steelmaking site, collects PLC data, and uses the converter temperature curve algorithm to calculate the real-time temperature curve that conforms to the converter steelmaking process. After each steelmaking process is completed, the system automatically records the production data of the converter upon receiving the end signal.

Case Introduction

Customer Name:Yuhua Steel Co., Ltd

Monitoring object:Converter mouth flame

Project NameConverter mouth flame analysis system

System Features

1. Specially designed for metallurgical environments, stable operation in complex environments

Stable operation under complex conditions such as high temperature and dust

2. Professional high-definition camera captures images with clear and undistorted images

High definition cameras capture images in real-time, automatically adjust camera parameters, reduce the impact of light, dust, and temperature changes at different production stages on site, and display clearer images;

3. Can be connected to PLC signals, making the steelmaking process intelligent and controllable

Docking with on-site PLC signals, determining the progress of converter steelmaking based on the blowing time and amount of oxygen in the PLC signal, and adjusting parameters in real time according to the PLC signal;

4. Supported by professional algorithms, real-time generation of converter temperature curve

Built in converter temperature curve algorithm, calculates the real-time temperature of the converter and forms a temperature curve;

5. Automatic data storage for easy data analysis and experience summarization

Automatically store converter production data, temperature curves, etc., with a storage time of over 90 days;

6. User permission management is beneficial for data confidentiality management

Multi level permission account management, fully ensuring data security

For more detailed feature introductions and mature solutions, please feel free to consult pre-sales personnel.