Isostatic pressure ceramic powder process

Firstly, remove the ceramic powder from the mold and compact it by tapping. Next, inject wave pressure oil into the mold and place the object to be processed, ensuring that the hydraulic oil level is level with the top of the object. Subsequently, set a compression pressure of 10 tons, and the equipment will automatically increase the pressure; When the pressure reaches the set value and enters the holding state, if there is a pressure drop during the process, the system will automatically replenish the pressure to maintain the set pressure.

After the compression is completed, the demolding operation can be carried out by manually tightening the screw to achieve demolding, and the sample processing is completed.

Optimization explanation: Using phrases such as "loading" and "compacting" through tapping to make the operation more precise; Clearly stating that the hydraulic oil level of the "to be processed object" is level with the top of the object makes the details clearer; adding content such as "the equipment will automatically increase pressure" and "the system will automatically supplement pressure to maintain the set pressure" improves the equipment operation logic; finally ending with "the sample processing is completed at this point", making the process more complete, the overall language more standardized and smooth, and the connection between steps more natural.