Square sample mold

21-30mm square tablet moldBelonging to laboratory consumables, various specifications of length, width, and size can be customized without standards, and the delivery time is generally 3-20 days. The commonly used specifications for ordinary square molds are generally within 3-50mm in length and width. Commonly seen in specifications such as width 5 × 10mm, 10 × 10mm, width 10 × 20mm, width 10 × 30mm, width 20 × 20mm, width 30 × 30mm, width 40 × 40mm, width 50 × 50mm, etc.

21-30mm square tablet moldUsage and maintenance:

Before each use of the mold, the surface of the mold should be wiped clean with dust-free paper to prevent the rust proof oil on the mold from affecting the test results of the sample. When applying pressure, be careful not to exceed the pressure that the mold can withstand. After using the mold, the samples on the mold should be cleaned in a timely manner to prevent corrosion of the mold. If not in use for a long time, the mold needs to be coated with anti rust oil and stored in a dry environment.

1. Place the mold in the center position of the tablet press, and do not exceed the mold's bearing capacity when applying pressure.

2. If there are sample residues on the surface of the mold that cannot be removed, please do not clean or soak them with chemical reagents;

3. If the mold is not used for a long time, anti rust oil can be applied to the surface of the mold to prevent rusting;

4. If the mold is not used for a long time, it needs to be stored in a dry environment;

Square mold product parameters: