Introduction to Anbai AT3817A

03.31,20252

Brief Introduction

measurement parameters	Cs-Rs,Cs-D,Cp-Rp,Cp-D,Lp-Rp,Lp-Q,Ls-Rs,Ls-Q,R-X,Z-θrad,Z-θdegDCR
Basic accuracy	Slow/medium speed: 0.05%; Fast: 0.1%
test frequency	10Hz~100kHz (resolution 0.001Hz)
Test range	Automatic, manual, and nominal ranges, 9 ranges
test speed	40 times/second, 10 times/second, 3 times/second
display range	L: 0.00001μH-9999.99H C: 0.00001pF – 9999.99μF R,X,Z: 0.00001Ω - 99.9999MΩ D, 0.00001 – 9.99999 Q: 0.00001 – 99999.9 Δ%: -999999% - 999999% θ(deg): -179.999° -179.999° θ(rad):-3.14159 – 3.14159 DCR: 0.00001Ω ~ 99.9999MΩ
output impedance	30 Ω, 50 Ω, and 100 Ω
Monitoring parameters	Z, D, Q, θr, θd, R, X, G, B, Y, Vac, Iac, Δ, Δ%
reading	All parameters are 6-digit: 999999
Equivalent method	Equivalent series and parallel connections
signal level	10.00mV~2.00V AC 100.0μA~20.00mA AC
DC bias	-2.5V~+2.5V (0.5%+0.005V)
average frequency	1~256
Trigger method	Internal, manual, external, and remote
trigger delay	0.01ms~60s
comparator	14 sorting levels, 10 combination grid levels, 1 set of unqualified levels, 1 set of sub parameter unqualified files Gear counting function: gear counting 999999
List scanning	10 steps (frequency, voltage, and current)
comparison method	Sequential/Absolute Deviation/Relative Deviation
calibration	Open circuit reset, short circuit reset (sweep frequency and dot frequency)
document	Internally store 10 files External USB storage for 10 files
data recording	9999 sets of files (. csv)
Sound function	Off/Qualified/Unqualified
interface	RS232/USB/Handler/RS485/GPIB (optional)
communication protocol	SCPI/Modbus
Other functions	Automatic LCZ
Power requirements	AC 100V-240V, 50Hz-60Hz 20W MAX
Dimensions and Weight	264 (width) x107 (height) x350 (depth) 3kg, Net weight

Last Video:

Next Video: