Single channel infusion pumps are widely used in microfluidic related fields due to their accuracy, stability, and strong anti-interference ability. This device is easy to use and operate. You can set, modify, and view fluid control parameters in the main startup interface. During the parameter input process, you can directly select the model and inner diameter of the syringe from the list, or manually input them and then enter other parameters (flow rate, liquid volume, infusion type). The task can be paused at any time during the work process, and various parameters can be reset and executed immediately. However, safety issues during use cannot be ignored.

1. Use a power adapter that matches the product.

2. There is a risk of compression between the push block and the end block. When the single channel infusion pump is running, do not place your fingers between the push block and the end block.

3. Excessive pushing and pulling when using a syringe may result in liquid spillage, which may cause harm to the human body or equipment. Please operate with caution!

4. If the device malfunctions, please contact the manufacturer promptly and do not open the casing by yourself.

5. Please be careful when plugging and unplugging the connection between the power adapter and the power port, and do not damage the plug.

6. If the power supply or plug is worn or damaged, please unplug the power plug.

7. Single channel injection pump is used for high-voltage electrospinning and other high-voltage electrostatic environments. When supplying power to this product, please note that if it is connected to high voltage static electricity, it will damage the product.

8. If the power supply or plug is worn or damaged, please unplug the power plug and replace it promptly.