Product Features:

A handheld measuring instrument that is easy to operate and can meet various needs.

Equipped with a large touch screen color LCD display, achieving intuitive operation and operability.

Inheriting the operability features of the original model, equipped with new measurement assistance and analysis functions to enhance operability.

This detector can measure in any direction based on the positioning of the measuring surface: horizontal, inclined, top, or vertical surface. (Multiple accessories to choose from).

The optional storage card can store a large amount of measurement data. In addition, the convenient function tracking can save 10 sets of measurement data.

Statistical processing and GO/NG judgment functions help manage data.

A high-speed thermal printer (with a printing speed approximately 1.5 times that of traditional models) is provided as a standard component. Printable measurement results (including judgment results) and evaluation profiles, as well as BAC and ADC profiles. Support horizontal mode printing to match the display effect on LCD screens.

Power on and preparation:

Installation of detector: With the power turned off, hold the main body of the detector to avoid contact and insert it into the drive part hole until a "click" sound is heard, ensuring a secure connection.

Connect the driver: embed the driver into the instrument body or use the standard extension cable to increase the connection distance.

Start device: Press the POWER/DATA button on the host to start, wait for the screen to display, and then press the Enter/Menu button to enter the function menu.

Calibration measurement:

Before calibration, it is necessary to prepare a roughness standard film and a calibration workbench, and the pattern of the standard film should be perpendicular to the measurement direction of the detector.

Enter calibration mode: Select "Calibration Measurement" and press the RED key to enter the calibration directory.

Enter standard value: Enter the Ra value on the standard piece (such as 3.00 μ m), and other conditions are usually kept as default.

Perform calibration: Place the drive unit gently on the calibration workbench, confirm the contact status (blue measurable on the screen), press the START button to start the measurement, and press the RED button to update the data after completion.

Under normal circumstances, the deviation of multiple measurements at the same position should be ≤± 0.05 μ m.

Actual measurement:

Place the workpiece: Ensure that the measurement surface is flat, lightly touch the workpiece with the driving part, and the screen will display blue to start the measurement.

Start measurement: Press the START button, and the instrument will automatically complete data acquisition.

Special surface treatment:

Arc/groove: The contour compensation function needs to be enabled.

Slope: Open the slope contour compensation.