Wire and Cable Swinging and Twisting Test

Wire and Cable Swinging and Twisting Testing MachineSuitable for plug leads, power cordsUSB cable, headphone cable, audio cable, headphone connectionBending or swinging tests of finished wire products such as wires. This machine fixes the wire on the fixture, adjusts the bending angle and testing speed of the wire, and adds a certain test load. During the test, it swings left and right, and after a certain number of times, the wire breakage rate is detected. The total number of swings is checked, and it can automatically count. When the sample is bent until it breaks and cannot be powered on, it can automatically stop the operation. The wire bending testing machine meets the requirementsThe provisions of UL817 and other relevant standards on "General Safety Requirements for Flexible Wire Components and Power Cord", as well as the "General Technical Standard GB/T14471-93" for wire bending testing.

Cable sway and torsion testing machineFeatures:

1. Adopting LCD touch human-machine interface, the large interface is intuitive and generous;

The control part adopts Mitsubishi PLC from Japan, which has reliable performance;

3. Adopting Mitsubishi servo motors from Japan for service life and reliability.

4 test times, automatic speed input adjustment.

5 multi station testing, high efficiency The touch screen can monitor the direct testing of each workstation

Main parameters

1. Working power supply: AC220V/50HZ;

2. Power: 500W;

3. Conductive function: Yes;

4. Test speed: 5-60 times/minute;

5. Bending angle: adjustable from 0 ° to 360 ° (+180 ° to -180 °);

6. Angle accuracy: ≤± 1 ℃

7. Test station: 3 independent stations (customizable)

8. Load capacity: 3 sets each of 100, 200, and 300

9. Protective board: A protective board is installed on the upper end of the signal interface to prevent the French code from falling and hitting the terminal post

10. The position of the guide plate can be adjusted up and down (with a distance of 1-300mm)

11. Metallurgical tool R angle: 4mm quantity 3 (can be customized)

12. Bending times: 0~99999 can be preset;

13. Overall dimensions: Thickness (60cm) X Width (120cm) X Height (135cm)

14. Weight (approximately): 65kg

specificWire and Cable Swinging and Twisting Testing MachineThe data function can be consulted with the connected testing equipment!