-
E-mail
yibao@szyibao.com.cn
-
Phone
18675539088
-
Address
312, Shangshuijing Comprehensive Building, 333 Jihua Road, Jihua Street, Longgang District, Shenzhen City, Guangdong Province
Download
Shenzhen Yibao Technology Co., Ltd
Dingyang SDS5000X series super fluorescence oscilloscope with bandwidth of 350 MHz, 500 MHz, 1 GHz
Date: 2024-01-17Read: 2
SDS5000X series super fluorescence oscilloscope
Key Features
Bandwidth 350 MHz, 500 MHz, 1 GHz
Real time sampling rate of 5 GSa/s
Storage depth of 250 Mpts
Waveform refresh rate 500000 wfm/s (Sequence mode)
Mixed Signal Measurement (MSO)
Multi touch, remote control
The SDS5000X is equipped with a 10.1-inch touchscreen that allows for quick adjustment of waveform positions, triggering of set areas, and parameter selection and settings. The SDS5000X supports up to dozens of parameter measurements. If traditional knobs are used for selection, it will undoubtedly consume a lot of time. Touch screen selection saves time and effort. In addition, SDS5000X also supports external mouse and keyboard.
Webserver enables remote control of oscilloscopes without the need to install high-capacity drivers. Through the backend VGA interface, measurement results can be demonstrated. At the same time, SDS5000X is also equipped with free upper computer software that supports SCPI programming commands.
Webserver enables remote control of oscilloscopes without the need to install high-capacity drivers. Through the backend VGA interface, measurement results can be demonstrated. At the same time, SDS5000X is also equipped with free upper computer software that supports SCPI programming commands.
Rich trigger types
The SDS5000X supports up to 11 intelligent triggering types, which can quickly trigger signals with different features. For example, using Runt can quickly trigger at the set amplitude value.
The use of traditional trigger types for special signals may require nearly 20 steps of setup. Therefore, the SDS5000X has added area trigger functionality to all trigger types. By simply drawing the trigger area box, complex signals can be triggered in one step.
The trigger sources supported by SDS5000X include 4 analog channels and 16 digital channels, EXT,EXT/5,AC Line。
The use of traditional trigger types for special signals may require nearly 20 steps of setup. Therefore, the SDS5000X has added area trigger functionality to all trigger types. By simply drawing the trigger area box, complex signals can be triggered in one step.
The trigger sources supported by SDS5000X include 4 analog channels and 16 digital channels, EXT,EXT/5,AC Line。
Serial protocol triggering and decoding covering multiple industries
SDS5000X provides multiple serial protocol triggers and decoders, covering multiple industries.
| I2C, SPI | Embedded serial protocol triggering and decoding |
| UART | PC serial protocol triggering and decoding |
| CAN, CAN FD, LIN, FlexRay | Triggering and Decoding of Automotive Serial Protocol |
| I2S | Audio serial protocol triggering and decoding |
| MIL-STD 1553B | Flight system serial protocol triggering and decoding |
Powerful measurement function
The SDS5000X currently supports over 55 parameter measurements. The advanced measurement function can simultaneously measure 12 parameters and display the trend of parameter value changes in the form of a trend chart. Open the statistics function to display the current value, average value, minimum value, maximum value, standard deviation, and number of statistics of the parameter. And the distribution of parameter values can be visually displayed in the form of histograms, for example, when measuring clock jitter, the distribution of jitter can be intuitively seen.
If you want to select a specific area for measurement, you can use the threshold measurement function and then move the cursor to select the area.
The selection of measurement sources includes analog and digital channels, as well as signals after Zoom, MATH waveform, and Ref waveform.
If you want to select a specific area for measurement, you can use the threshold measurement function and then move the cursor to select the area.
The selection of measurement sources includes analog and digital channels, as well as signals after Zoom, MATH waveform, and Ref waveform.
Multi in one oscilloscope
SDS5000X integrates multiple functions, greatly saving space and providing users with more value.
16 channel logic analyzer
25 MHz isolated signal source module, compatible with Bode plot function for power loop response testing
Template Testing
Digital Multimeter
Porter diagram function
Power analysis software
counter
frequency meter
16 channel logic analyzer
25 MHz isolated signal source module, compatible with Bode plot function for power loop response testing
Template Testing
Digital Multimeter
Porter diagram function
Power analysis software
counter
frequency meter
Specifications
| bandwidth | 350 MHz 、500 MHz 、1 GHz |
| Real time sampling rate | 5 GSa/s |
| number of channels | 2/4 + EXT |
| Storage depth | 250 Mpts/CH |
| Maximum waveform capture rate | 500000 wfm/s (Sequence mode) |
| interface | USB Host、USB Device、LAN、Pass/Fail、Trigger Out、10 MHz In、10 MHz Out 、VGA |
| vertical resolution | 8 bit |
| screen | 10.1-inch capacitive touch screen with a resolution of 1024 * 600 |
| Trigger Type | Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video, Qualifed, Zone |
| Serial triggering and decoding (standard) | I2C, SPI, UART, CAN, LIN |
| Serial triggering and decoding (optional) | CAN FD, FlexRay, I2S, MIL-STD-1553B,SENT，Manchester |
| Digital channel (optional) | 16 channels, 1.25 GSa/s sampling rate, 62.5 Mpts/CH storage depth |
| Signal generator (optional) | Single channel, maximum output frequency 25 MHz, sampling rate 125 MSa/s, waveform length 16 kpts |
| Standard probe | SP3050A，500 MHz， 1 set per channel |