-
E-mail
yibao@szyibao.com.cn
-
Phone
18675539088
-
Address
312, Shangshuijing Comprehensive Building, 333 Jihua Road, Jihua Street, Longgang District, Shenzhen City, Guangdong Province
Download
Shenzhen Yibao Technology Co., Ltd
A bidirectional programmable DC power supply that integrates bidirectional power supply and feedback load functional characteristics
Date: 2024-01-05Read: 1
ITECH bidirectional programmable DC power supply IT6000C series IT6006C-300-75
The IT6000C series is a bidirectional programmable DC power supply developed based on third-generation SiC technology, which can achieve the function of a source and provide power; It also has sink capability, which not only absorbs power but also cleanly returns the consumed energy to the grid, with standard dual quadrant function. The voltage of IT6000C can reach 2250V. It supports parallel connection and active current sharing using master-slave mode, and the power can be extended to 2MW. It has a built-in function generator that can freely generate any waveform and import LIST files through USB interface to generate waveforms. The IT6000C series has high reliability settings and protection features, and rich measurement functions, making it widely used in various fields such as automotive electronics, green energy, high-speed testing, high-power testing, etc. It is a DC power supply with rich functions, excellent performance, and wide applicability.
Product Features
♦ Adopting third-generation SiC technologyHaving the dual abilities of Souce and Sink
♦ High power density, up to 18kW within 3U,Parallel connection can be extended up to 2MW
♦ Voltage output range: 0 to 2250V
♦ Current output range: 0 to 2040A (single cabinet), 0 to 8000A (parallel connection between cabinets)
♦ Bidirectional energy transfer, seamless switching across quadrants
♦Can be used for battery cycle testing, supporting multiple battery charging and discharging modes such as CC/CV/CP
♦Can be used as a photovoltaic simulator (with SAS1000 software), supportingSimulation function of I-V curve for solar cell matrix
♦Can be used as a battery simulator (with BSS2000 software) to simulate the characteristic curves of lithium iron phosphate/ternary lithium batteries
♦ Built in USB/CAN/LAN/digital IO interface, optional GPIB/analog/RS232
♦various, multiple, diverse, a variety ofProtection function, supporting OVP, ± OCP, ± OPP, OTP, power failure, and islanding protection
♦ Built in LV123, LV148, DIN40839、 ISO-16750-2, SAEJ1113-11, LV124, and ISO21848 standard voltage curves for automotive power grids
♦ Built in function generator, supports arbitrary waveform generation
♦ Support control loop priority mode setting, setting different loop speeds
♦ Adjustable output impedance
Product Features and Advantages
Seamless bidirectional energy transfer
The IT6000C series is a bidirectional programmable DC power supply developed based on third-generation SiC technologyUnlike traditional power sources and loads, there may be brief jumps and discontinuities during the switching of positive and negative currents. The IT6000C series, as a standard high-speed bidirectional power supply, can achieve high-speed source and load current mode conversion, enabling seamless and fast switching between output and absorption currents, effectively avoiding voltage or current overshoot. It is widely used for testing energy storage devices such as batteries, battery packaging, and battery protection boards.
High energy recovery efficiency
The IT6000C series bidirectional programmable DC power supply has energy recovery function, which can recover electrical energy and directly utilize it in the factory, rather than consuming it in the form of heat energy. Its conversion efficiency can reach 95%, which not only greatly reduces users' electricity costs, but also avoids the use of air conditioning or expensive refrigeration systems, reducing noise.
Simulation of solar cell array
The IT6000C series is equipped with SAS1000 solar cell matrix simulation software, which can simulate the I-V curve of the solar cell matrix and is built-inEN50530、Sandia、NB/T32004、CGC/GF004、CGC/GF035The SAS model allows users to simply set parameters and simulate I-V curve output to generate reports for testing the static and dynamic maximum power tracking performance of photovoltaic inverters. Users can also edit any I-V curve that can block up to 4096 points to achieve dynamic cloud cover effect, or store 100 I-V curves under different lighting and temperature conditions in memory, and set the execution time and order of each curve to test the long-term maximum power tracking performance of photovoltaic inverters under different climate conditions.
