Welcome Customer !

Membership

Help

Shenzhen United Jiali Technology Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Success Cases>
About Us

Shenzhen United Jiali Technology Co., Ltd

  • E-mail

    1785535884@qq.com

  • Phone

    18988754036

  • Address

    2nd Floor, 439 Ailian Road, Longgang District, Shenzhen

Contact Now

Application of EKV110 Fully Automatic Kinematic Viscosity Tester in Railway Locomotive Depot

Trains and tracks on railways will be widely usedair compressor oil, heavy

Load gear oilrust preventive oilHydraulic oil, diesel engine oil and other oil products. All belong to lubricating oil

Class. The service life of lubricating oil has a certain time limit. But specifically in use

During the process, due to the varying frequency and period of use, most of it is based on experience

To determine whether replacement is necessary. If the quality indicators of lubricating oil can be tested to determine

Can it meet the standard for continued use, so as to effectively determine the lubrication

Does it need to be replaced during use without wasting lubricating oil.

One important indicator is the kinematic viscosity of lubricating oil, which is used in railway locomotives

The section laboratory generally uses traditional manual motion viscosity detectors, which are easy to operate

Relatively backward. Due to the fact that the lubricating oil used on the railway is pitch black

There will inevitably be a lot of impurities, and when tested with a traditional manual kinematic viscometer, it will be pitch black

The lubricating oil will hang on the glass wall of the viscosity tube, and the liquid level cannot be clearly seen by the naked eye

Due to the location, the detected results may differ significantly from the actual results. Not only that,

Moreover, due to the high impurities in the used lubricating oil, it is difficult to clean the viscosity tube,

Tong uses chromic acid to soak for 24 hours before cleaning, which not only wastes time but also easily sticks to the hands, causing harm to the human body. Therefore, traditional manual viscosity detection has many drawbacks.

EKV110 not only achieves more accurate detection, but also achieves full performance throughout the entire testing process

Automatic, including sampling, suction, immersion, detection, cleaning, drying, etc. Cleaning adhesive

In terms of temperature management, EKV110 * solves the problem of unclean or time-consuming manual cleaning

And it also avoids harm to the human body.

The test results are shown in the following table: