Main technical indicators

110 dB dynamic range and<0.006 dB trace noise

Measurement speed of<26 microseconds/point, 32 channels, 20001 measurement points

Support TRL/LRM calibration, providing wafer, fixture, waveguide, and antenna measurements

Frequency conversion loss, return loss, isolation, and group delay of the mixer

Amplifier gain compression, harmonics, IMD, and pulsed RF

Agilent E8363C features and specifications:

Features:

Measurement speed of<26usec/point,

Number of measurement channels: 32 independent measurement channels

Measure the points for each scan: Users can define from 2 to 16001

The dynamic range of the system is up to 40GHz, with a standard of 110 decibels and an intermediate frequency bandwidth of 10Hz;

Tracking noise:<0.006 decibels root mean square at 1kHz IF bandwidth standard and option 14

Rated power: -12dBm standard, -17dBm option 14 and UNL

Frequency resolution: 1Hz

Phase noise: nominal offset of -55dBc at 1kHz

Test port background noise: 10Hz intermediate frequency bandwidth standard with<-114dBm;

IF bandwidth range: 1Hz to 40kHz, nominal

RF connector 2.4mm male (50 ohms);

VGA video output, 15 pin miniature D-Sub

From 10 MHz to 40 GHz

Dynamic range of 110 dB, trace noise of<0.006 dB

Measurement speed of<26 microseconds/point, 32 channels, 20001 points supported

TRL/LRM calibration, wafer, fixture, waveguide, and antenna measurement

Mixer conversion loss, return loss, isolation and group delay,

Amplifier gain compression, harmonics, IMD， Pulse RF

Interface:

GPIB Two Ports: Controller andSpeaker/Receiver

USB-1 front panel and 4 on the rear panel

LAN-10/100 BaseT Ethernet port, automatic selection of 8-pin configuration

Main features and technical indicators:

Dynamic range of 110 dB and trace noise of<0.006 dB

Measurement speed<26 microseconds/point, 32 channels, 20001 measurement points

Supports TRL/LRM calibration and provides wafer, fixture, waveguide, and antenna measurements

Frequency conversion loss, return loss, isolation, and group delay of the mixer

Amplifier gain compression, harmonics, IMD, and pulsed RF

Agilent E8363C Description:

General network analysis can be conducted, and optional software and/or hardware customized analysis solutions can be used,

To meet your application needs (such as multi port, pulse RF, etc.).