Welcome Customer !

Membership

Help

Shenzhen Honieger Technology Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Success Cases>
About Us

Shenzhen Honieger Technology Co., Ltd

  • E-mail

    525804469@qq.com

  • Phone

    18924605331

  • Address

    501, Building 6, Longbi Industrial Zone, No. 27 Dafa Road, Dafapu Community, Bantian Street, Longgang District, Shenzhen

Contact Now

In the lithium battery production workshop, installCombustible gas detectorIt is a key measure to prevent fire and explosion accidents, mainly targetingHydrogen gas (H?)、Electrolyte volatile organic solvents (VOC)Waiting for combustible gases. The following are specific installation plans and precautions:

detection target

  • Hydrogen gas (H?)During the process of battery charging, discharging, and aging, precipitation may occur.

  • Electrolyte solvent vaporEsters such as DMC, DEC, EC, etc. (flammable and explosive).

  • Other combustible gasesBy-products such as methane (CH?) and carbon monoxide (CO).

  • Selection of combustible gas detectors

  • (1) Sensor type

  • Catalytic combustion sensor(Catalytic)

    • Applicable gasesMost flammable gases such as hydrogen, methane, VOCs, etc.

    • advantageLow cost, high stability, suitable for routine testing.


  • Infrared sensor (IR)

    • Applicable gases:VOC、 Methane, etc.

    • Not affected by hypoxic environment, long lifespan.


image.png


onlinefixed typeflammable gasdetectorHNAG1000-EX-JSuitable for various environmentsqiReal time and accurate detection of body concentration and leakage, using imported electrochemistry, InfraredSensor and microcontroller technologyThe advantages include fast response speed, high measurement accuracy, good stability and repeatability The explosion-proof wiring method is suitable for various hazardous areas and compatible with various control alarms, PLCs, DCS and other control systems. It can simultaneously achieve on-site alarm warning, 4-20mA standard signal output, and relay switch output;

Execution standard:

GB3836.1-2010 Electrical Equipment for Explosive Gas Atmosphere Part 1: General Requirements

GB3836.2-2010 "Electrical equipment for explosive gas atmospheres - Part 2: Explosion proof type" d ""

GB 3836.15-2000 "Electrical equipment for explosive gas atmospheres - Part 15: Electrical installations in hazardous areas (excluding coal mines)"

GBT50493-2019 petrochemicalstenchDesign standards for toxic gas detection and alarm

GB12358-2006 General Technical Requirements for Workplace Gas Detection and Alarm Devices

GBZ 2.1-2007 Occupational Exposure Limits for Hazardous Factors in the Workplace

image.png

image.png