-
E-mail
szcx17@163.com
-
Phone
13631576199
-
Address
1F, Fenghe Park, Gongle Industrial Zone, Xixiang Avenue, Bao'an District, Shenzhen City, Guangdong Province
Shenzhen Chuangxin Instrument Co., Ltd
szcx17@163.com
13631576199
1F, Fenghe Park, Gongle Industrial Zone, Xixiang Avenue, Bao'an District, Shenzhen City, Guangdong Province
Jingyu Medical Technology (Suzhou) Co., Ltd. is a high-tech medical device enterprise specializing in the research and development of deep brain stimulation (DBS) systems. Founded in 2011, headquartered in Suzhou Industrial Park, it has independent intellectual property rights and has achieved multiple technological breakthroughs in Parkinson's disease treatment, drug addiction, and other fields.?
Company Overview?
Jingyu Medical was established on September 30, 2011, with Ning Yihua as its legal representative and a registered capital of 360 million RMB. It currently has 234 employees (2023 data). The company focuses on the research, development, production, and sales of deep brain stimulation (DBS) systems, which are mainly used for the treatment of neurological diseases such as Parkinson's disease and drug addiction
Recently, Jingyu Medical Technology (Suzhou) Co., Ltd. ordered a batch of instruments and equipment from our company:
1. Residual voltage tester
The residual voltage tester is designed according to the national standards GB9706.1-2007 "Medical Electrical Equipment Part 1: General Requirements for Safety" and GB4706.1 "Safety of Household and Similar Electrical Appliances Part 1: Safety Requirements". 22.5 stipulates that "equipment connected to the power grid with a plug must be designed to measure the voltage between each power pin and between each power pin and the equipment casing 1 second after unplugging the plug. ”Design. This instrument has a sufficiently high test impedance and uses a simulated unplugging method to disconnect the device from the grid voltage at its peak state. It is used for medical devices and household appliancesWaiting for electricalEquipment residual voltage test.

Main technical parameters:
1. Output voltage: AC 0-242V;
2. Test voltage: 10-150V;
3. Test time: 1 second;
4. Test impedance: 1000 M Ω;
5. Test alarm range: 60/34V;
6. Output power: 2000W;
7. Test discrimination: Sound and light alarm, while cutting off voltage;
8. Instrument power supply: AC220V 50Hz.