Fracture force and connection firmness tester

DL-D fracture force and connection firmness tester

Adopting a 5.7-inch (320 × 240) colorful PLC LCD display with Chinese menu display. Adopting digital closed-loop control, with an AD acquisition speed of 500KHz and an internal code of 1 million; High precision clock chip, power-off storage; PLC control dynamically displays the loading force value; Overload alarm shutdown protection; Nominal specifications, testing, upstream, downstream, time, calibration. Can communicate with the upper computer for convenient experimental data processing; Control the menu on the LCD screen through the keyboard, print test data onboard, and display tension in real-time.

Tensile strength test range: 0-100N, error not greater than ± 0.1N, resolution 0.01N. Test time: 1-999S, arbitrarily selected, error not greater than ± 0.5S.

Test speed: fracture force 500mm/min, connection firmness 10mm/min, error not greater than ± 2%. Printing method: Each time can print 8, 10, or 13 test data, as well as average puncture force and deviation values.

Used to test the catheter fracture force of anesthesia kits, the firmness of the connection between the catheter and the catheter connector, the firmness of the connection between the needle seat and the needle tube of anesthesia needles, and the firmness of the connection between the liner core and the liner core seat.;

This tester is designed and manufactured based on the testing methods for fracture force and firmness in YY0321. Used to test the catheter fracture force of anesthesia kits, the firmness of the connection between the catheter and the catheter connector, the firmness of the connection between the needle seat and the needle tube of anesthesia needles, and the firmness of the connection between the liner core and the liner core seat.