Medical injection needle rigidity tester

Introduction to medical injection needle rigidity tester:

Adopting a 5.7-inch (120 × 90) colorful LCD touch display screen, with PLC Chinese menu display. Nominal specifications, pipe wall, span, set load, maximum deflection, printing setting, testing, up and down, time, calibration. Control the menu on the LCD screen through the keyboard and print test data onboard

Reference standards:

GX-9626-D Medical Injection Needle Rigidity Tester*Designed and manufactured in accordance with the relevant provisions of GB18457-2015 "Stainless Steel Needle Tubes for Manufacturing Medical Devices" and GB15811-2016 "Disposable Sterile Injection Needles" standards;

Technical Indicators:

Tube wall: Choose from three options: normal wall, thin wall, and ultra-thin wall;

Nominal specification: 0.2-3.4mm;

Set load: 1.2-60N, accuracy: ± 1%;

Loading speed: When loaded to the set value, its speed is 1mm/min; Span: 5-50mm

Accuracy: ± 0.1mm (11 specifications);

Deflection test: 0-0.8mm, accuracy: ± 0.01mm;

Printing method: The test data, average deflection value, and deviation value can be printed 8, 13, or 20 times at a time.