-
E-mail
yishuosh@126.com
-
Phone
18019766383
-
Address
1st Floor, Building D, 6688 Songze Avenue, Qingpu, Shanghai
Shanghai Yishuo Experimental Instrument Factory
yishuosh@126.com
18019766383
1st Floor, Building D, 6688 Songze Avenue, Qingpu, Shanghai
| Product Type | Core Features | Functional advantages | Applicable scenarios |
|---|---|---|---|
| High and low temperature test chamber | Wide temperature range coverage, fast temperature change rate, high temperature control accuracy | It can achieve temperature range adjustment from -70 ℃ to 150 ℃ (conventional), with a maximum temperature change rate of 15 ℃/min and a temperature control error of ± 0.5 ℃. It uses high-quality compressors and insulation materials, which are energy-saving and have strong stability | Adaptability testing of high and low temperature environments for electronic components, automotive parts, and metal materials |
| Humidity Chamber | Coordinated control of temperature and humidity, with a wide range of humidity and minimal fluctuations | Temperature control from -40 ℃ to 180 ℃, humidity control from 20% RH to 98% RH, synchronized temperature and humidity fluctuations of ≤± 1 ℃ and ± 2% RH, equipped with an intelligent dehumidification system to avoid condensation affecting testing | Stability testing of temperature and humidity sensitive products such as electronic products, textiles, food, and pharmaceuticals |
| High temperature aging chamber | High temperature tolerance, rapid heating, and good uniformity | The maximum temperature can reach 300 ℃, with a heating rate of 5 ℃/min. The temperature uniformity inside the box is ≤± 2 ℃, and the inner liner is made of stainless steel material, which is resistant to high temperature corrosion and easy to clean | High temperature aging, life evaluation, and performance degradation testing of plastics, rubber, and electronic components |
| UV aging chamber | Accurate simulation of UV spectra, controllable irradiation intensity | Using UVA-340/UVA-313 lamps, the irradiation intensity can be adjusted from 0.4-1.2W/m ², accurately simulating the ultraviolet band of sunlight. Equipped with a condensation system to simulate humid environments and accelerate the aging process | UV aging resistance testing of coatings, plastics, outdoor building materials, and textiles |
| Xenon lamp aging chamber | Full spectrum simulation, close to natural lighting, high testing efficiency | Xenon lamp emission spectrum covers 290-800nm, matched with solar spectrum, adjustable irradiation intensity, equipped with a filtering system to remove harmful bands, and the test results have a correlation of over 90% with natural aging | Weather resistance testing for automotive exterior, aviation materials, photovoltaic modules, and outdoor advertising materials |
| Rain Test Chamber | Multiple spray modes, controllable water pressure and flow rate, simulating real rainfall | Supports multiple modes such as drip, shower, splash, spray, etc. The water pressure is adjustable from 0.05-0.3MPa, and the nozzle angle can be rotated to meet the testing requirements of different protection levels IPX1-IPX8 | Waterproof performance testing of automobiles, lighting fixtures, outdoor electrical appliances, and communication equipment |
| sand dust test chamber | Adjustable dust concentration, uniform dust emission, strong sealing performance | Using talcum powder or quartz sand as the test medium, the concentration can be adjusted from 50-500g/m ³, equipped with an airflow circulation system to ensure even distribution of sand and dust, and the equipment has good sealing performance to avoid sand and dust leakage | Dust prevention testing for automotive components, outdoor instruments, military equipment, and rail transit equipment |
| Walk in test chamber | Large volume, capable of testing large samples, wide temperature and humidity adjustment range | The volume can be selected from 10m ³ to 100m ³, with a temperature range of -40 ℃ to 80 ℃ and a humidity range of 20% RH to 98% RH. It supports multi zone temperature and humidity control and can accommodate samples such as whole vehicles and large equipment for testing | Environmental adaptability testing for automobiles, large household appliances, aerospace components, and production line components |
| Non standard testing equipment | On demand customization, strong scene adaptability, high functional integration | Customized according to specific customer scenarios (such as low pressure, strong corrosion, multi parameter synchronous testing, etc.), supporting multi parameter integrated control of temperature, humidity, pressure, lighting, etc., equipped with a dedicated intelligent control system | Personalized and differentiated testing needs for military, scientific research institutions, and special manufacturing industries |