6% Ruhr Cone Joint Comprehensive Tester

Today we are introducing the 6% Ruhr cone joint tester!

Firstly, let's understand the main features of this tester. It is made of high-quality materials, with a reasonable structural design, and is very convenient to use. Not only that, this tester also has excellent accuracy, making you feel more at ease during the operation process. In addition, it has a wide measurement range and is suitable for various types of conical joints, making your testing more comprehensive.

Next, let's take a closer look at the usage of this testing device. Firstly, place the pressure rod of the tester inside the joint, and then tighten the nut to the specified torque. Then, slowly move the piston upwards until it reaches the specified height. Finally, observe the readings and determine whether the quality of the joint meets the requirements based on the results.

The specific parameters of this test are as follows:

GB/T 1962 test items: leakage, leakage, separation force, unscrewing torque, ease of assembly, stress cracking, overload resistance.

ISO80369/YY/T0916 test items: pressure attenuation leakage, positive pressure air leakage, negative pressure air leakage rate, stress cracking, axial load separation resistance, anti twist torque separation, anti overload (sliding wire) performance.

Programmable controller: PLC+ARM

Sensor: High precision force sensor with software and hardware protection function

Axial force: 0N~80N, with an error not exceeding ± 2%;

Internal water pressure: 0kPa~400kPa can be set arbitrarily, with an error of no more than ± 0.5%;

Separation force: 10N-70N with an error not exceeding ± 2%;

Holding time: 1-60s, with an error not exceeding ± 0.5s, can be set arbitrarily;

Torque: 0.010N. m to 0.500N. m

Negative pressure: -10Kpa to -94Kpa (adjustable) with an error not exceeding ± 1%

Negative pressure leakage rate resolution: -0.0001Pa/m3/s

Resolution of positive pressure leakage rate: 0.0001Pa.m3/s

Printing method: Airborne micro needle printer

Power supply: AC90V-240V/50Hz

One set of fixtures (customizable)

Comes with a positive pressure air source

Power: 200W

Net weight: 20Kg

Dimensions: 440 × 350 × 384 (mm)