Welcome Customer !

Membership

Help

Shanghai Yaoyou Electric Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Video
Video

Shanghai Yaoyou Electric Co., Ltd

  • E-mail

    851193598@qq.com

  • Phone

    18516586104

  • Address

    302, Building B, 951 Qiangye Road, Songjiang District, Shanghai

Contact Now
Brief Introduction

Siemens S7-400 PLC Level 3 and Level 4 Password Decryption/Successful Decryption on the Same Day

CP412 repair decryption, CP414 repair decryption, CP416 repair decryption, CP417 repair decryption, if the power indicator light is not on and fully lit, repair if the power does not start, if the indicator light flashes, repair the CPU communication module, if the functional module is damaged, repair if the communication connection cannot be connected, repair if the communication network port is damaged, repair if there is no display when powered on, if the module light is not on, repair if the module has no output, repair if the output port is damaged, repair if the power indicator light is not on, repair if the BF and SF lights are on, if the output end is not repaired, if the input end cannot be controlled for repair, repair if there is an error, repair if the program is out of order, repair if the communication cannot be started, repair if the indicator light is all on, repair if the module light is.

637729306682405457116.jpg

The pin of the CPU slot on the computer motherboard was accidentally bent, but it can still be used. Many pins of the CPU are shielded and useless, so there is no need to connect them to the motherboard. However, after the motherboard pins are bent, they can be gently adjusted with tweezers to restore their normal shape. If there are no practical issues with using it like this, there's no need to worry.

If there is a problem, cut a thin copper wire that is the same thickness as the CPU pin and slightly longer. Just use the copper wire in the network cable. Of course, other materials with suitable thickness and hardness are also acceptable. Insert it into the CPU socket first, and then put in the CPU. Adjust the length just to make contact with the CPU break point, not too long or too short. This situation is not covered by warranty. Because it's an external injury.

Through the above content, we have learned how to handle CPU pins that are bent or broken. Not all CPU pins are universal, and it is also related to the interface and CPU compatibility.