1feature
JDX-01 grounding boot is a grounding device designed for track mounted lifting equipment that can slide with the height of the track, in accordance with the relevant provisions of the national standard GB/T15361-94 and the safety regulations for cranes, which stipulate that each crane should have a clear grounding device. Simultaneously used in conjunction with lightning rods. It can introduce the large kiloampere current generated by lightning into the ground, protecting the electrical appliances in the crane room from damage caused by lightning strikes. At the same time, it also solves the problem of voltage difference caused by the movement of lifting equipment during lightning, which leads to spark damage to the bearings of the walking mechanism (due to the point contact of the bearings) and causes losses.

IIapplication
JDX-01 grounding boots are widely used as grounding devices on rail mounted lifting equipment such as ports, docks, steel mills, and material yards. At the same time, the grounding boots and lightning rods are connected by a cable, which can protect the electrical equipment in the lifting equipment room and the bearings of the walking mechanism, thereby reducing equipment failure rates and extending service life.

3、 Installation(Attached image)
The JDX-01 grounding shoe is equipped with a fixed bracket (can be customized with a special bracket according to the drawing). During installation, the grounding shoe (can be equipped with a lightning rod) assembly is welded or screwed onto the walking trolley or rivet seat Simultaneously on the walking platform frame.Connect the wire to the inside of the grounding shoe bracket, paying special attention to the installation height
(Due to the installation height affecting the quality of conductivity and the service life of the conductive plate).

Please noteConductive plates are vulnerable parts and can be purchased separately.

(Installation diagram)