WS4320 Industrial Online Primary Battery Dissolved Oxygen Electrode-Shanghai Water Instrument Technology Co., Ltd

Download

Download

Shanghai Water Instrument Technology Co., Ltd

E-mail
waterinst@163.com
Phone
15821255634
Address
Room 906, Building 2, No. 2388 Xiupu Road, Pudong New Area, Shanghai

Contact Now

WS4320 Industrial Online Primary Battery Dissolved Oxygen Electrode

Date: 2015-07-27Read: 0

Free download

WS4320 Industrial Online Primary Battery Dissolved Oxygen Electrode

1、 WS4320 Industrial Online Primary Battery Dissolved Oxygen Electrode

WS4320-原电池工业溶解氧电极

2、 WS4320 Industrial Online Primary Battery Dissolved Oxygen Electrode Technical Parameters

measurement range	0.00-40.00 or 0.0-400.0% (gel electrolyte)
accuracy	± 2% of full range (25 ℃)
repetitiveness	± 2% of full range (25 ℃)
Zero point output	Less than 0.2mV (25 ℃)
Saturated output	25 ± 5mV (in air or saturated water, 25 ℃)
response speed	30S
Main material	POM or Sai Steel Pipe
temperature compensation	Thermistor compensation 0-50 ℃
Electrode size	12*130mm
Cable length	6 meters or 10 meters
electrode terminal	Needle shaped 4-core connector

3、 Application

Scope of application: wastewater, aquaculture, chemical industry, seawater and other fields.

Precautions for use:
1. Remove the protective cap or sheath at the bottom of the electrode and rinse the electrode with pure water. Then dry off the moisture and connect the electrode to the instrument
Adjust the instrument in percentage display mode, check electrode stability, and ensure repeatability is within ± 2%.
2. The electrode needs to be soaked in water for 20 minutes before its performance can be restored.
3. Electrode cleaning: Generally, soak in 3% dilute hydrochloric acid for 10 minutes.
4. The electrode film is made of plastic film. Please make sure not to use sharp objects to scratch or damage the sensor.