Working principle of hydrothermal reactor

The hydrothermal reactor can be manually screwed and sturdy. The maximum applicable temperature is180 ℃； The highest temperature can reach 230 ℃

A hydrothermal reactor is a closed container capable of decomposing insoluble substances. Can be used for sample pretreatment in atomic absorption spectroscopy and plasma emission analysis; It can also be used for low-dose synthetic reactions; The purpose of rapidly dissolving insoluble substances can also be achieved by using a sealed environment with strong acid or alkali inside the tank and high temperature and high pressure. It is a powerful assistant for the determination of trace elements and the digestion of samples during trace element analysis. It can be applied in the determination of heavy metals such as lead, copper, cadmium, zinc, calcium, manganese, iron, mercury, etc. It can also be used as a high-temperature, high-pressure, corrosion-resistant, high-purity reaction vessel, as well as in organic synthesis, hydrothermal synthesis, crystal growth, or sample digestion and extraction. Dissolve heavy metals, pesticide residues, food, sludge, rare earths, aquatic products, organic matter, etc. before sample preparation. Therefore, it is widely used in research and production in departments such as petrochemicals, biomedicine, materials science, geochemistry, environmental science, food science, and commodity inspection.

Product Features:Good corrosion resistance, no harmful substance spillage, reduced pollution, safe to use, can quickly and non destructively dissolve samples that are difficult to dissolve under conventional conditions and containvolatile elementsThe sample. Beautiful appearance, reasonable structure, simple operation, shortened analysis time, and reliable data. Inside containsPTFE liningandPPL has two materials for double-layer care, which can resist acid, alkali, etc. Can replace platinumcruciblesolvehigh-purity aluminaChineseTrace element analysisThe problem of sample dissolution processing

Operation Method:Translate into EnglishreactantPlaced inside the kettle, it is recommended that the feeding coefficient be less than0.8. When the reactant system is corrosive, it should be placed inside a PTFE liner to ensure that the reactor body is not corroded. Translate into EnglishHydrothermal synthesis reactorplaced inheaterInternally, according to regulationsheating rateRaise the temperature to the desired reaction temperature (below the specified safe operating temperature). When the reaction is completed and cooled down, it is also necessary to strictly follow the prescribed cooling rate for safety andReaction kettleThe service life. After confirming that the internal temperature is below the boiling point of the reactant solvent, the kettle lid can be opened for subsequent operations. After each use of the hydrothermal synthesis reactor, it should be cleaned promptly to prevent rusting. Special attention should be paid to cleaning the sealing parts of the kettle body and kettle cover line, and strict precautions should be taken to prevent them from being damaged or bumped.