-
E-mail
3154897564@qq.com
-
Phone
17765106485
-
Address
Building 4, No. 686 Nanfeng Road, Fengcheng Town, Fengxian District, Shanghai
Shanghai Tiandao Instrument Co., Ltd
Maintenance and upkeep techniques for FLD04-1000 civil air defense filter absorber
Date: 2025-08-10Read: 0
FLD04-1000 modelThe civil air defense filter absorber is the core equipment in protective engineering to resist toxic and harmful gases, and its performance directly affects the safety of personnel during wartime. Scientific maintenance and upkeep can effectively extend the lifespan of equipment and ensure stable operation at critical moments.
1、 Daily inspection points
Before and after each use, it is necessary to check whether the appearance of the equipment is intact, with a focus on whether the filter canister and connecting pipes are deformed, damaged, or leaking. Observe the sealing status of the air inlet and outlet to ensure that there are no loose or aged sealing rings. At the same time, check whether the equipment is firmly fixed to avoid loosening of the connection parts due to vibration, which may affect the protective effectiveness.
2、 Regular cleaning and maintenance
Wipe the equipment casing with a dry soft cloth every week to remove dust and dirt, and keep the ventilation openings unobstructed. Every quarter, it is necessary to remove the protective cover of the canister and clean the dust and impurities attached to the surface with a brush, but do not touch the internal filter material. Before long-term use, specialized moisture-proof agents should be used to protect the filter canister, and the equipment should be stored in a dry and ventilated place to prevent metal parts from rusting or filter materials from becoming ineffective due to moisture in a humid environment.
3、 Key component maintenance
The filter tank is the core of the equipment, and special attention should be paid to its service life to avoid exceeding the service life. Regularly check the sealing of the canister and replace it immediately if rust, cracks, or loose adsorbent materials are found. The initial filter of the air inlet should be cleaned once a month, and the surface dust can be gently removed with a vacuum cleaner. If necessary, rinse with clean water and air dry before reinstalling.
4、 Post use processing
After each use, if exposed to chemical or biological warfare agents, the equipment should be disinfected. Wipe the outer shell with a neutral cleaner, rinse with clean water, and let it dry naturally. If the canister is suspected of being in contact with high concentrations of pollutants, it should be replaced even if there are no abnormalities in appearance and cannot be reused.
Through standardized maintenance, it can be ensured thatFLD04-1000 modelThe civil air defense filter absorber is always in good combat readiness, providing reliable air safety protection for personnel in the protective engineering during wartime.