Applicability of small laboratory spray dryer is a company specializing in the research, development, production and sales of low-temperature experimental equipment, ultrasonic equipment and other products. Mainly engaged in a series of scientific and educational experimental instruments such as small spray dryer, spray dryer, experimental spray dryer, high-speed centrifugal spray dryer, small spray dryer price, experimental spray dryer price, high-speed centrifugal spray dryer price, etc.
Small spray dryer spray drying (spray dryer/spray dryer) and it is mainly applicable to universities, research institutes and laboratories of food, medicine and chemical enterprises to produce micro particle powders. It has broad spectrum applicability to all solutions, such as emulsion and suspension, and is suitable for drying heat sensitive substances, such as biological products, biological pesticides, enzymes, etc. Because the sprayed materials are only exposed to high temperature when sprayed into aerosol particles, they are only heated instantly, which can keep the active ingredients of these active materials intact after drying.
Technology:
1. Full automatic control: one button startup, after setting spray process parameters, the temperature reaches the preset temperature, the peristaltic pump starts automatically, the touch screen displays the running animation, and the running process is clearly displayed; When shutting down, simply press the stop button and the machine will automatically shut down safely.
2. Equipped with a nozzle cleaner (needle), it will automatically clear when the nozzle is blocked, and the frequency of needle passing can be automatically adjusted.
3. The nozzle has high efficiency.
4. Manual control: If you need to adjust the process parameters during the experiment, you can easily switch to manual mode, and the entire experiment process is dynamically displayed on the color touch screen (animation)
5. Color LCD touch screen parameter display: inlet temperature/outlet temperature/peristaltic pump speed/air volume/needle frequency.
6. Shutdown protection function: When shutting down, simply press the stop button, and the machine will immediately stop running except for the fan, ensuring that the equipment will not burn out the heating part due to misoperation (forcibly shutting down the fan).
7. The spray, drying and collection system is made of transparent high borosilicate heat-resistant glass materials, so that the drying process can be carried out in a pollution-free environment.
8. Equipped with an imported oil-free air compressor, the particle size of the powder sprayed follows a normal distribution, with excellent fluidity and very low noise, less than 60db.
9. The atomization structure of two fluid spray is made of stainless steel, with compact design and no auxiliary equipment.
10. The design of dry temperature control adopts real-time PID constant temperature control technology, which enables accurate temperature control in the entire temperature range and heating temperature control accuracy of ± 1 ℃.
11. In order to maintain the purity of the sample, an air inlet filter is equipped.
12. The feeding amount can be adjusted by the feeding peristaltic pump, and the maximum sample size can reach 50ml.
13. The dried finished dry powder has a relatively uniform particle size, with over 95% of the dry powder within the same particle size range.
14. Innovative tower wall blowing device with higher material recovery rate.
15. For viscous materials, there is a nozzle cleaner (through needle) that automatically clears the nozzle when it is blocked, and the frequency of the through needle can be adjusted automatically.
Technical Specifications:
1. Double control mode of full automatic control and manual control of spray dryer, dynamic display (animation) of color touch screen throughout the experiment
2. Inlet air temperature control: 30 ℃~300 ℃
3. Air outlet temperature control: 30 ℃~140 ℃
4. Evaporation water volume: 1500mL/H~2000ml/h
5. Maximum feed rate: The peristaltic pump can be adjusted to a maximum of 2000ml/h
6. Zui small feed amount: 50mL
7. Upgradeable to dual level separation collection system
8. Real time PID constant temperature control technology, heating and temperature control accuracy: ± 1 ℃
9. Drying time: 1.0-1.5s
10. The small spray dryer has a shutdown protection function: just press the stop button when shutting down, and the machine will stop running immediately except for the fan, so as to ensure that the heating part of the equipment will not burn out due to misoperation (forced shutdown of the fan).
11. Color LCD touch screen parameter display: inlet temperature/outlet temperature/peristaltic pump speed/air volume/needle frequency
12. Nozzle diameter: 0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm optional, and can be customized according to requirements
13. Equipped with a nozzle cleaner (through needle), it will automatically clear when the nozzle is blocked, and the frequency of the through needle can be automatically adjusted
14. The whole spray dryer is made of stainless steel, and the two fluid spray atomization structure. The spray, drying and collection system is made of transparent high borosilicate heat-resistant glass materials
15. Equipped with an imported oil-free air compressor, the particle size of the powder sprayed follows a normal distribution, with good fluidity and very low noise, meeting the national laboratory noise standards;
16. Whole machine power: 3KW/220V
17. Tower wall blowing device, higher material yield
18. Spray head cooling device (optional)
19. Can be directly upgraded to a nitrogen circulation system for drying organic solvent materials
20. Equipment dimensions: 1200mm (height) x 650mm (length) x 500mm (width)