Typical Applications
It can be widely used for continuous monitoring of clean water, sewage, power production, chemical distribution, industrial pharmaceuticals and food.
Instrument Features
★ Applied to measure the flow velocity of various conductive liquids
★ Strong corrosion resistance and wear resistance
★ Measurable forward/reverse flow rate
★ Large LCD screen, user-friendly interface, easy to use
★ Self diagnostic function
★ Persistent EEPROM, used to save configuration parameters and measurement data in case of power failure
The measurement results are not affected by physical properties such as temperature, pressure, viscosity, and density
Technical instructions
Display LCD display, optional m3 or L display units
Structural embedded type design, integrated or split type
Measure medium liquid or solid-liquid two-phase fluid with conductivity>0.5 μ s/cm2
Measurement range 0.05m/s to 12m/s
The measurement accuracy is within the range of 0.1m/s to 10m/s, with an accuracy of 0.5%
Caliber 6mm~2000mm
公称压力 PN6、PN10、PN16P、N25,PN40、PN63、PN100、PN160、PN250、PN420
Waiting for options
Output signal 4-20mA or frequency
Communication RS485, supports MODBUS communication protocol (not standard), supports HART communication protocol (optional)
Connection diameter DN6~DN2000 is flange connection
The connection standard is applicable to various pipeline flange standards
The precision requirements of the product standard comply with EN1434-1:2003 standard
The protection level is IP65 when integrated, and IP67 or IP68 when split (optional)
Power supply AC220V or DC24V (optional)
Environmental temperature 0-60 ℃

Li: