Congratulations to our company for organizing at Nantong University“Protective clothing molten metal splash tester”In the bidding process, it has been continuously evaluated and approved by the expert organizing committee. The following is the result announcement:


Shanghai Pinkui specializes in providing professional equipment and efficient services for testing structures, research universities, large and medium-sized enterprises.
Shanghai Pinkui is committed to providing protective clothing, welding clothing, and labor protection clothing,firefighting suitThe development of testing equipment for military clothing is at the domestic technological level.
Received recognition from a wide range of users and industry experts and teachers.

Protective clothing anti molten metal splash testerDeveloped according to testing standards such as ISO 9150, EN 348, GB/T 17599, AQ6103, GB 8965.2, etc., it is suitable for the protective performance of various fabrics and composite fabrics that prevent molten metal splashes from burning the human body. The protective clothing metal bead splash tester can evaluate the material's resistance to liquid metal splashes. During the testing process, an appropriate amount of molten metal is sputtered onto the sample placed at a certain angle. Attach a PVC film to the back of the sample and make contact with it. Evaluate the damage by recording the changes in PVC film after the sputtering process. According to the test results, repeat the test with a larger or smaller amount of metal until the PVC film is minimally damaged. A furnace with induction coils and high-frequency generators melts metal. High performance fiber dual color pyrometer is used for temperature control and measurement of sputtering temperature. The temperature controller adjusts the temperature between 700 ° C and 1800 ° C. The stepper motor controls the tilt speed and tilt angle. The cooling device uses water flow from the inlet and outlet of the connected equipment for cooling.

The relevant equipment is as follows: