GT2710-VTBD Mitsubishi Touch ScreenDetailed explanation of functional features:

Display and operation

Screen size: 10.4-inch TFT color LCD screen, display size 211.2mm (width) × 158.4mm (height).

Character display: A 16 dot matrix standard font can display 40 characters x 30 lines (full width), while a 12 dot matrix standard font can display 53 characters x 40 lines (full width).

Touch mode: Analog resistive film technology, supports multi-point touch gestures (such as zooming and scrolling), with a minimum key size of 2 × 2 dot matrix and a maximum of 2 pressed points at the same time.

Storage and Expansion

User memory: ROM 57MB (for storing programs), RAM 128MB (for running data), with a write life of 100000 times.

Extended storage: Supports SDHC cards (up to 32GB) for convenient data backup, historical record storage, and program updates.

Interface and Communication

Standard interface:

RS-232 (D-sub 9-pin male port, speed 4800-115200bps)

RS-422/485 (D-sub 9-pin female port, same speed as above)

Ethernet (RJ-45, supporting 10BASE-T/100BASE-TX)

USB 2.0 (2 Host interfaces, 1 Device interface, speed 480Mbps)

Protocol support: Compatible with common industrial communication protocols such as MODBUS, CC Link, MELSEC, etc., it can seamlessly connect with Mitsubishi PLCs (such as Q series, R series) and other third-party devices.

Power Supply and Protection

Power supply: DC24V (range DC20.4-28.8V), maximum power consumption ≤ 42W at load, ≤ 15W for individual body, ≤ 8W when background light is off.

Protection level: IP67F on the front (dustproof, waterproof), IP2X inside the cabinet, suitable for harsh industrial environments.

Working conditions: temperature 0-55 ℃, humidity 20% -90% (no condensation).