Automatic drip dispenser

Automatic drip dispenserDouble drip feeding can set the start time and duration of drip separately, and drip feeding can be set at two different speeds to achieve variable speed drip feeding. After setting the drip time, assist in analyzing the drip process. LCD screen display, intuitive display, user-friendly interface. It is an instrument used in laboratories and research institutes.

Technical Specifications:
Single drip weight: 1000g/0.1g
Single scale drip time: 250 minutes (resolution: 1 second)
Drip range: 6g/h~1000g/hr (resolution: 0.1g/hr)
Drip time accuracy:<10 seconds
Working power supply: 220VAC 50VA

Introduction to experimental operation buttons:
The portable automatic drip pump has four independent buttons on both sides.
Automatic drip dispenserThe lower button has three functions: long press for three seconds - weigh to zero; Rotation - time adjustment (minutes); Short press - start.
The function of the button on this machine is quick suction. Press this button to immediately perform quick suction (usually used when filling or cleaning liquid pipes), and press it again to stop.

Operation steps:
Turn on the switch on the back, and the LCD screen will light up. Place the empty bottle for dripping on the top stainless steel plate, connect the dropper, and press and hold the lower button for three seconds to zero the weight.
Put 2 drops of liquid into a bottle.
Slowly turn the knob to adjust the drip time (if the drip time is set to 1.5 hours, turn it to 90 minutes).
Press the button to start working.
The machine will automatically stop after the set time.
Note: To facilitate the evacuation of the liquid at the bottom of the bottle, a thick paper sheet can be placed on one side of the bottom of the bottle to tilt it before weighing and setting it to zero.