MSA gas detectorMaintenance:

1. Check the gas flow rate, usually 30/h, as excessive or insufficient flow rate can have a significant impact on the analyzer results

2. Replace filter paper: Stop the air pump and drain the filter tank

3. Check for any air leaks in the pneumatic system. Whether the diaphragm of the sobbing pump is damaged, whether the sealing ring of the sampling probe is broken, whether the four-way valve and condensate are damaged, etc

4. Clean the sampling probe and unclog the sampling hole pipeline.

5. Check if the condenser is working properly, usually adjust the temperature within the range of 3 degrees Celsius.

6. Check the measuring room for dirt and clean it promptly.

The above content introduces the maintenance of MSA gas detectors. Maintaining MSA gas detectors can effectively maintain their cleanliness and lubrication, prolong their service life, and hopefully be helpful for everyone's use.