ZETEC ultrasonic phased array flaw detector for detecting corroded pipelines and plates

The newly developed manual scanner by ZETEC, represented by Shanghai Jiuheng Instrument Co., Ltd., can load multiple ultrasonic phased array probes and, combined with the TOPAZ series portable ultrasonic phased array system, can perform C-scan imaging

• Mainly used for corrosion detection of metal plates or pipelines
• Defect detection of base material
• Measurement of Thickness Reduction of Metal Workpieces
• Layered defects in composite materials

The main technical performance is as follows:

• Manual scanner: compact and flexible, easy to use, can complete detection operations with one hand
• High scanning efficiency, defect detection can be completed in a short period of time
• Two parallel encoding wheels: Real time recording of the position difference between the two wheels to achieve precise positioning in all directions
• Two types of encoding wheels can be replaced by themselves: ferromagnetic wheels can be used for detecting ferromagnetic materials such as carbon steel, and non ferromagnetic wheels can be used for detecting composite materials
• Two control buttons

  Start/Stop Data Collection: Used to control the status of data collection

  Turn on/off coupling pump: used to control probe coupling

• The real-time imaging effect is good, and the defect distribution can be intuitively seen from the image
• Compatible with multiple phased array probes, capable of detecting materials of different thicknesses and types
• Position tracking: error less than 1mm
• Suitable for scanning flat plates or pipelines, with a small detectable diameter of 6 inches