Warm congratulations to Shanghai Jiuheng Instrument for its successful participation in the 28th Quality Control and Testing Industrial Equipment Exhibition

Shanghai Jiuheng Instrument successfully participated in the 28th Quality Control and Testing Industrial Equipment Exhibition, which lasted for three days from October 30th to November 1st. In the past three days, our company has received a continuous stream of customers, and the new GRD-CS1 series ultrasonic scanning microscope exhibited in this issue has received high praise from customers.

The GRD-CS1 series ultrasonic scanning microscope is a non-destructive testing tool that mainly uses high-frequency ultrasonic waves to detect various types of water-cooled plate brazing, vacuum diffusion welding, and material bodies. It is very sensitive to the bonding layer and can detect defects such as pores, cracks, inclusions, and delamination inside the sample, and visually display them in the form of graphics.

scanning mode

·A. B, C scan · Transmission scan

. Layer by layer scanning · Multi layer scanning

·Contour scanning and data acquisition scanning

·Tray scanning · Double head C-SAM

performance parameters

·Ultrasonic transducer adaptation range: 0.5~50MHz

·CS1 X/Y scanning detection range: 400mmx400mm/GRD-CS1-L X/Y scanning detection range: 1200mmx700mm (customizable fully automatic equipment)

·Z-direction focusing stroke: 100-300mm

·Maximum scanning speed: 1000mm/s

·Sampling rates: 1G/s, 1.5G/s, 3G/s

·Optional scanning axis maximum resolution: 1 μ m

·Scanning axis positioning accuracy: ± 5um

·Thickness measurement range: Material 0.3-50mm (recommended probe 10/15/25/30M)

·Software: NDTS technology software

Software functions: Calculation of brazing rate and defect calculation

Application field

·Brazing of water-cooled plates, vacuum diffusion welding of radiators, composite material plates, plastics, metals, ceramics, etc