The process of tensile testing machine promotes the development of industry
tensile testing machineAlso known as a testing machine, it can test the tensile and compressive strength, elongation, and elongation of various materials, semi-finished products, and finished products. It can be used for peeling, tearing, bending, bending, compression, etc. Different models of tensile testing machines are matched with different fixtures, and the price is naturally the same.
For general soft packaging manufacturers, a tensile testing machine with a range of around 200N is sufficient, which is single arm. For larger ones, it is gantry style and weighs more than 1 ton. Steel manufacturers should consider using such or larger machines, depending on the products they producetensile testing machineThe travel distance is generally between 600mm -800mm -1000mm, which should be suitable for most manufacturers for measuring product parts materials.
The tensile testing machine has a speed specified by the national standard of 200mm/min, while there are devices on the market with a precision between 10 and 500mm/min, and some with a precision of 0.001 to 500mm/min or even higher. The former generally uses ordinary motors with infinitely variable speed, which have lower precision and are cheaper in price; The latter uses servo motors and computer servo systems with higher accuracy and resolution; Choose according to the requirements of each manufacturer.tensile testing machineIncluding force measurement accuracy, velocity accuracy, deformation accuracy, displacement accuracy, the highest of these accuracy values can reach plus or minus 0.5. For general manufacturers, an accuracy of 1% of the amplitude is sufficient. In addition, the force resolution can basically reach one hundred thousandth.
With the development of science and technology and the increasing demand for industrial development, tensile testing machines have been applied in various industries as instruments for detecting product quality and engineering project performance.tensile testing machineWhen adding load, if the pointer vibrates or stops, the clutch gear may wear out: repair or replacement is needed. If the leather washer or spring of the friction disc is worn, the leather washer or spring needs to be replaced. The control handle should be shifted and adjusted to fit well with the socket.