Welcome Customer !

Membership

Help

Shanghai Feiyue Experimental Instrument Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Article

Shanghai Feiyue Experimental Instrument Co., Ltd

  • E-mail

    261673709@qq.com

  • Phone

    17388090111

  • Address

    Shanghai

Contact Now
Cleaning methods for biochemical incubators
Date: 2021-10-09Read: 0

Turn off all control keys and then cut off the power to determine if it is turned onBiochemical IncubatorThe door; Dip a cloth into drinking water containing detergent and wipe every corner of the incubator; Dip a cloth into drinking water to wipe the cleaning agent inside the incubator clean;

In fact, all kinds of incubators need to be disinfected, otherwise it will affect the later cultivation of cells. Cleaning steps for biochemical incubator:

Turn off all control keys and then cut off the power to determine if it is turned onBiochemical IncubatorThe door; Dip a cloth into drinking water containing detergent and wipe every corner of the incubator; Dip a cloth into drinking water to wipe the cleaning agent inside the incubator clean; Connect the power supply, restore all components, and ensure they are in normal condition; The incubator should be cleaned once a quarter to keep the cultivation path clean.

The above cleaning steps are generally the same. This is about cleaning the biochemical incubator, but using drinking water alone is not enough. Cells are not large pieces of dirt, they can be cleaned by simply rinsing with water. The biochemical incubator also needs to be disinfected.

In fact, the disinfection method is relatively simple, and different users use different disinfection methods:

1. First, use 70% ethanol to scrub, then use 0.1% chlorhexidine to scrub. If you are worried, use potassium permanganate and formaldehyde in a 1:1 ratio to fumigate once.

2. Then wipe the inner wall with 75% alcohol, fumigate with potassium permanganate overnight, and ventilate for a week while turning on ultraviolet radiation.

3. Wipe the inner wall with 75% alcohol, ventilate for 10 minutes, and expose to ultraviolet radiation for 30 minutes.

4. Pay attention to the cleanliness of the surrounding environment. After use, rinse with pure water first, then with 95% alcohol, and finally expose to ultraviolet light.

So after using itBiochemical IncubatorCleaning and disinfecting afterwards can ensure that it is clean and pollution-free when used again.