Stainless steel vertical centrifugal pumpIt is a vertical multi-level and multi-stage structure. The screw clamps and connects the inlet section, middle section, and outlet section into one. Each stage of the water pump is equipped with an impeller and a guide vane. The axial force is solved by hydraulic balance method, and the residual axial force is borne by the ball bearing and lubricated with grease. The shaft seal adopts soft packing or mechanical seal. The product complies with the JB/T2727-93 standard "Types and Basic Parameters of Stainless Steel Vertical Centrifugal Pumps", mainly used for suction and delivery of diluted, clean, non corrosive, non explosive clean water and liquids with physical and chemical properties similar to water that do not contain solid particles or fibers.

Scope of application of stainless steel vertical centrifugal pump:

Widely used for fire protection, domestic water supply, air conditioning unit circulation, and cooling water transportation in high-rise buildings.

Stainless steel vertical centrifugal pump product features:

1. Advanced hydraulic model: high efficiency and wide performance range.

2. Novel structure and reliable operation: The balance drum is eliminated, and its axial force adopts hydraulic balance, which solves the problems of corrosion, biting and wear of the balance drum, ensuring more reliable operation.

3. Less operating and maintenance costs: Using mechanical seals, it is wear-resistant, leak free, has a long service life, low failure rate, and has less operating and maintenance costs.

4. Smooth operation and low noise: Using a low-speed motor, the pump runs smoothly with lower noise.

5Stainless steel vertical centrifugal pumpVertical structure, small footprint.

Installation, use, precautions and maintenance of stainless steel vertical centrifugal pump:

1. Before installation, carefully check whether there are any hard objects in the flow channel of the pump body to avoid damaging the impeller and pump body during operation.

2. Regulating valves should be installed on the inlet and outlet pipelines of the pump to control its operation within the rated operating conditions.

3. Open the inlet valve to fill the entire pump chamber with liquid.

4. Turn on the power and gradually open the valve on the discharge pipeline when the pump reaches normal speed, and adjust it to the desired working condition.

5. Check if the temperature rise at the motor and bearing is ≤ 70 ℃, and promptly handle any abnormalities found.

6Stainless steel vertical centrifugal pumpMechanical seals are strictly prohibited from working under dry grinding conditions.