Zhongfa EI 700-24 flow valve

Model 700-24 MagnaValve ® It is a normally closed valve that can directly adjust the flow rate of non-ferrous metal media

Pressure or suction blower. MagnaValve's built-in sensors measure flow and communicate with

The FC-24 controller (sold separately) provides accurate and repeatable flow. The valve meets the precision requirements

Requirements of SAE AMS 2430, AMS 2432, and other aerospace and commercial specifications

Shot blasting application. This type of valve can use ceramic beads or glass beads. Other non-ferrous metal materials, such as

Aluminum oxide (AlOx) can also be used through special arrangements. Contact the factory for more information. Each

The valve will be pre calibrated using the customer's medium.

Working principle

The structure of MagnaValve includes an electromagnetic control plunger for medium flow control. this

The plunger is located in the throttle hole. After being powered on, the electromagnet lifts the plunger, allowing the medium to flow through

Valves. The medium flows through the plunger and lands on the paddle, bending according to the flow velocity of the medium

Thereby generating accurate traffic signals. When MagnaValve is not powered, the plunger

Return to its resting position and stop all media streams. If the power supply is interrupted for any reason, the plunger will return

The rest of the locations and safely hold media, effectively eliminating media leaks.

Supporting controller

FC-24