How to determine if the temperature and pressure flow in the online smoke monitoring system has been burned out

Used our new ZeinstrumentThe boss of the online smoke monitoring equipment knows that the temperature, pressure and flow of the smoke online monitoring equipment we produce use an integrated machine,Real time measurement of temperature, pressure, dynamic pressure, flow rate, etcParameters.It is specifically developed and designed for harsh environments such as high temperature, high humidity, high dust, and high corrosion in continuous monitoring of flue gas emissions. Meet the requirements of relevant national standards.Xinze InstrumentThe SVPT-100 temperature pressure flow monitor is designed based on the differential pressure measurement principle of traditional pitot tubes. When measuringInsert the "S" type pitot tube into the pipeline, and fix the center axis of the total pressure and static pressure measuring holes of the pitot tube at the center of the flow section and in the same direction as the streamline. The total pressure measuring hole is facing the airflow direction, while the static pressure measuring hole is facing away from the airflow direction.This designEasy to maintain and simple to operate.

But no one can guarantee that there will be no minor problems with large equipment after prolonged use, as the working conditions in each factory are also different. Today, I will give an explanation on the issue of the power supply burning out of the temperature pressure current integrated machine, hoping to be helpful to everyone.

If there is unstable voltage or other problems during the use of the equipment on site, it may cause the temperature, voltage, and current integrated machine to malfunctionThe 24V switch power supply is burnt out. If it is burnt out, don't worry, we first need to power on the temperature, voltage, and current integrated machine，Then use a multimeter to test whether the power supply of the temperature, pressure, and current analysis module is available24V， If there is no 24V, we need to check if the switch power supply is not supplying power,ifWithout power supply, the temperature pressure current analysis module cannot start normally, and upon disassembly, it will be discovered thatA 24V switch power supply has a 220V input but no 24V output. In this case, we can basically determine that the 24V switch power supply is broken. We only need to replace it with a new switch power supply and assemble it for use. But professional matters still require professional people to do. If bosses have any problems during the use of equipment, please contact us as soon as possibleXinze InstrumentManufacturer, we have a dedicated person here to test and analyze for you. If any problems are found, we will handle them accordingly.

hz