Applicable occasions:

Detection of anti-seepage leakage and damage in landfills, leakage and damage detection in tailings dam bodies, leakage and damage detection in scenic lakes, leakage and damage detection in aquaculture ponds, and leakage and damage detection in sewage storage pondsChemical solid waste treatment tank leakage prevention

As a flexible waterproof material, geomembrane has high anti-seepage ability and has been widely used in anti-seepage engineering at home and abroad, such as in anti-seepage treatment of landfills, sewage treatment, roads, underground, airports, ports, water conservancy, municipal facilities, swimming pools and other projects.

During the construction and use of anti-seepage engineering, the overlap between geomembranes/Improper handling of welding positions can result in inadequate sealing; Factors such as uneven ground, worker trampling, and equipment crushing can all cause damage to the geomembrane; Geomembranes may also crack due to aging and other reasons during long-term use. The above factors will all lead to a decrease in anti-seepage performance and result in leakage phenomena. It is necessary to detect the damage/leakage of geomembranes (anti-seepage membranes).

Instrument features:

second generationThe KODIN-7DJ geomembrane (HDPE anti-seepage membrane) leakage and damage detection system equipment, based on the absorption and adoption of on-site feedback from a generation of users, integrates the application experience of various working conditions in different regions, further optimizes and upgrades. Through a large number of testing experiments, the core boosting component is improved to output a voltage of up to 50KV. According to the thickness of the inspected geomembrane and the dry and wet conductivity of the soil layer, it can adapt and match the sensitivity to better and easily detect the location of the leakage point and provide continuous alarm prompts. The battery capacity has doubled to 4400mAh, making it suitable for long-term continuous construction in the field.

Applicable types of geomembranes:

Electrical insulation materials such as HDPE, LDPE, PVC, polypropylene, asphalt geomembrane, conductive support geomembrane, etc.

Applicable types of geomembrane subgrade:

Compacted clay with suitable conductivity and conductive concrete\\Suitable conductive GCL/geosynthetic materials such as conductive aluminum foil.

Main technical performance:

Output high voltage:1.0KV～50KV (continuously adjustable)

thickness detection0.1~35mm (affected by the soil environment on site)

2.Direct indication of high voltage output value

3. Variable sensitivity

4.battery12.6V/4400mA

5.Power consumption:≤5W

6.hostsize：220mm × 130mm × 88 mm

7.background light

8.Instant power on, automatic power-off and shutdown

9. Full touch panel3-digit LCD display output voltage,

10.Alarm: Peak buzzer alarm

11. Leakage count: 999

Connect before use:

1. Connect the grounding wire, connect the probe rod and cable, fix the probe brush, press the power button, select the appropriate detection voltage to suspend the high-voltage pole, and adjust the sensitivity at the critical point of alarm and non alarm. It can be tested immediately.

2. After use, charge the device promptly and place it in the instrument packaging box.

Install the power supply into the instrument box for future use.

power supply

1.KODIN-The 7DJ geomembrane leakage detector is powered by a rechargeable lithium battery, and the battery level prompt will be displayed in the upper right corner of the measurement interface during use. A battery level display of 5 bars indicates a normal fully charged state, while a battery level display of 0 bars indicates a low battery. Although low battery voltage will not cause incorrect measurement results, long-term undercharging of the battery can easily damage the battery, so it should be charged in a timely manner.

charge

Connect the charger output plug to the rear end of the host labeledOn the socket of the Charger Connector, the charger input plug is connected to an AC power outlet. The charger indicator light is red to indicate charging, and turns green when fully charged

attachmentPacking List

KODIN-7DJ geomembrane leakage detector host：oneTaiwan

High voltage test rod:onebranch

Explore brush: Twobranch

backbelt：onea

Fuse:twobranch

ground wire:oneroot

Charger:onea

an instruction manual:onecopy

Instrument Warranty Card/certificate:each onecopy

Grounding rod:onea

strong magnet：one

Instrument box:onea

Note: Various specifications can be customized according to user requirementsExplore brush.