-
E-mail
sdgerte@126.com
-
Phone
15376779485
-
Address
Hengda Yulan International, Liuting Street, Chengyang District, Qingdao City
Shandong Geert Environmental Technology Co., Ltd
GLT-SD40 Wet Oxygen Monitor: Escorting Smoke Emissions under Complex Operating Conditions
Date: 2025-12-11Read: 1
Real time monitoring of flue gas emissions has become a key focus of environmental supervision in industrial production processes. However, complex working conditions often make monitoring equipment "out of place":
High temperature and high corrosion environment lead to shortened equipment life!
Inaccurate humidity measurement affects the accuracy of emission data!
Frequent equipment maintenance and high maintenance costs!
Data fluctuations during environmental inspections pose a risk of exceeding standards!
GLT-SD40 plug-in wet oxygen monitor adoptsSolid state electrolytic ceramic sensing technologySpecially designed for harsh working environments such as high temperature, high humidity, and strong corrosion. This device can simultaneously achieveOnline continuous monitoring of flue gas humidity and oxygen concentrationTo meet national environmental standards and provide reliable data support for enterprises to meet emission standards.
high measurement accuracy：Adopting the third-generation solid-state electrolyte sensing technology, it has fast response speed and high measurement accuracy.
Suitable for harsh environments：Adopting special materials and structural design, it can withstand high temperatures and highly corrosive gases, and can operate stably even in smoke with high water content and complex composition.
Dual factor synchronous monitoring:Simultaneously monitoring both humidity and oxygen parameters, with rapid response and accurate and reliable data.
Intelligent calibration:Support one click air calibration function, easy to operate, and efficient maintenance
Compliant with environmental requirements:Meet the requirements of national environmental monitoring standards, output standardized signals, and can be directly connected to environmental data acquisition instruments to provide data support for compliant emissions.
The GLT-SD40 wet oxygen monitor has been successfully applied in multiple industries, helping customers solve monitoring problems:
🏭Traditional manufacturing industry
Iron and Steel Metallurgy：Monitoring of flue gas from sintering machines, blast furnaces, converters, etc
Electric Energy：Monitoring of emissions from coal-fired power plants and gas-fired boilers
🧪 Chemical Industry and New Materials
petrochemical：Monitoring of tail gas from catalytic cracking and sulfur recovery units
Chemical and Pharmaceutical Industry：Control of tail gas and process gas humidity oxygen in the reactor
VOCs treatment：Monitoring of import and export of governance devices
♻️Environmental governance field
waste incineration：Monitoring and combustion optimization of incinerator flue gas
hazardous waste treatment：Continuous monitoring of flue gas from incineration line
biomass energy：Boiler flue gas emission monitoring
-
After installing GLT-SD40 at the outlet of the VOCs treatment device, a certain chemical enterprise not only achieved real-time monitoring of the treatment effect, but also timely grasped the saturation status of the filter material, avoiding the problem of excessive emissions caused by inaccurate monitoring.
Feedback from a certain garbage incineration plant after application shows that the equipment effectively supports combustion optimization control, stable and reliable environmental data upload, successful annual environmental verification, and extends the service life of core processing equipment.
Whether it's the environmental upgrade of traditional industries or the monitoring layout of new projects,GLT-SD40 Plug in Wet Oxygen MonitorWe can provide everything for youReliable, economical, and maintenance freeThe monitoring plan.
If you are facing challenges in smoke monitoring, please feel free to contact us for professional solutions!