GNSS displacement station is a millimeter level displacement monitoring product implemented using differential RTK technology, which can be widely used in engineering fields such as dam safety monitoring, bridge health detection, landslide warning, etc. This product has high precision, high stability, and real-time data transmission capabilities, and can accurately monitor small displacement changes of target objects in various complex environments. GNSS displacement stations are easy to operate, easy to install, capable of remote monitoring and data analysis, providing strong guarantees for engineering safety. In addition, its powerful data processing capabilities and compatibility enable the product to easily integrate into various monitoring systems, achieve data sharing and fusion, and provide comprehensive and efficient solutions for engineering safety monitoring.

Installation requirements:

1. There should be no tall buildings around the reference station or measurement station, and if unavoidable, they should be kept at least 20 meters away.

2. The recommended distance between the reference station and the measurement station (baseline distance) is less than 500 meters, with a maximum of 2KM, and it is recommended to install at the same altitude as much as possible. If the distance is too large, it will lead to a decrease in accuracy.

3. The distance between the reference station and the measurement station should be visible as much as possible, and if it is not visible, high walls, buildings, and other obstructions should be avoided.

4. Prioritize ensuring that the satellite antenna is the highest point within 20 meters.

5. The installation base should be firm to avoid accuracy degradation caused by wind.

6. For specific installation matters, you can also contact the company's after-sales video guidance.