High purity nitrogen generatorUsage steps:

1. Preparation work:

Ensure that the device is powered on and connect the necessary air source and power cord.

Check whether the pressure gauge, flow meter and other instruments of the equipment are working properly.

Ensure that the adsorbent or membrane separation module of the equipment is in normal condition.

2. Start:

Turn on the power switch of the device and follow the instructions in the device manual to start the device.

Waiting for the device to start up usually takes a few minutes.

3. Set parameters:

Set the required nitrogen flow rate and purity as needed. These parameters can usually be set through the device's control panel or user interface.

4. Run:

Press the start button or switch, and the device will start running.

Monitor the operating status of equipment, including indicators such as pressure, flow rate, and purity. Ensure that the equipment is functioning properly.

5. Close:

When nitrogen is no longer needed, the operation of the nitrogen generator can be stopped by the stop button or switch of the equipment.

Turn off the power switch of the device.

As an efficient and convenient device, a high-purity nitrogen generator can extract high-purity nitrogen from the surrounding air, meeting the urgent demand for high-quality nitrogen in various industries.