Nitrogen has important application value in mass spectrometry analysis. Traditionally, the gases required for mass spectrometry analysis are generally high-purity hydrogen and helium. However, due to the flammability and explosiveness of hydrogen, nitrogen has gradually become one of the main gases for mass spectrometry analysis.Mass spectrometer nitrogen generatorIt is a device used to generate high-purity nitrogen gas, widely used in scientific experiments and industrial fields such as mass spectrometers. It separates impurities from the air through a special process, providing a pure nitrogen supply.
The services provided by our companyNitrogen-M-30 Mass Spectrometry Nitrogen GeneratorUsing pressure swing adsorption technology to generate nitrogen gas, carbon molecular sieves are automatically regenerated without the need for secondary purification, and clean, dry, and phthalate free nitrogen gas can be continuously obtained. The purity and flow rate of nitrogen gas are stable, and the service life is long. The modular integrated oil-free compressor improves the safety of air supply without relying on external compressed air sources. The flow rate range is available in two models: 34L/min or 64 L/min, which can supply nitrogen to one or more instruments simultaneously.
Maintenance techniques:
1. Drying tube maintenance: When the discolored silicone gel changes color by 50%, it needs to be replaced. During operation, the power should be turned off and the gas should be drained to avoid thread wrapping with sealing tape.
2. Electrolyte management: Regularly replenish distilled water and replace electrolyte every six months to prevent impurity accumulation.
3. Air circuit inspection: Check the active drain daily and clean the air circuit system regularly to ensure there are no blockages.
4. Filter replacement: Replace dust removal, water filtration, and hydrocarbon filters according to frequency of use to extend equipment life.
5. It is recommended to conduct a comprehensive maintenance every 6 months, with professional personnel calibrating parameters and replacing vulnerable parts.