ELGA PURELAB UltraThrough advanced reverse osmosis technology, deionization process, and fine filtration mechanism, impurities, ions, organic matter, and even microorganisms in water are almost completely removed, producing high-purity ultrapure water.

　　ELGA PURELAB UltraUsage steps:

1. After turning on the power switch and turning on the device, it will perform a self check and initialization process. During this process, the device will inspect various components, and the display screen (if any) may show the device's status information, such as system self check, initialization completion, and other prompts.

2. After the equipment starts running, it first enters the pretreatment stage. The raw water passes through the pretreatment column to remove large particle impurities, residual chlorine, organic matter, etc. in the water, protecting the subsequent RO reverse osmosis membrane. The pre treated water enters the RO reverse osmosis membrane, and under pressure, water molecules pass through the RO membrane, while most impurities such as salt and heavy metal ions are trapped on one side of the membrane, forming concentrated water (wastewater) that is discharged. After RO reverse osmosis, the pure water enters the ultra purification column to further remove trace ions, organic matter and other impurities in the water, making the water quality meet the standards of ultra pure water.

3. Water intake operation:

When the device displays that pure water or ultrapure water has reached the set water quality standard, a water intake device can be directly connected to the outlet of the device for water intake. When taking water, attention should be paid to avoiding pollution and minimizing the entry of air into the waterway.

4. Stop water production:

When water production is not required, select the option to stop water production or shut down on the device operation interface (different models may have different operating methods). The equipment will first stop the operation of RO reverse osmosis and ultra purification (if any), and then stop the pretreatment process.

5. After the device stops running, turn off the power switch of the device and unplug the power plug.