Reactor RecirculatorAccurate control of the internal temperature of the reaction vessel is achieved through the flow of specific heat transfer media (such as thermal oil or ethylene glycol aqueous solution) in the circulation system. When heating is required, the heating system transfers heat to the heat conduction medium, causing its temperature to rise. Then, the high-temperature medium is pumped to the jacket or coil of the reaction vessel for heat exchange, and the heat is transferred from the medium to the materials inside the reaction vessel, thus achieving the heating process. On the contrary, in the refrigeration mode, the refrigeration compressor is started, which takes away the heat of the heat conduction medium, lowers the temperature, and the low-temperature medium circulates to the reaction kettle to absorb the heat of the material, achieving the purpose of cooling down.

　　Reactor RecirculatorMain functions:

Accurate temperature control: The reactor cycler is equipped with a temperature sensor that can monitor the temperature of the heat transfer medium in real time and accurately. By adjusting the heating power, cooling capacity, and flow rate of the circulation pump through the control system, the temperature of the heat transfer medium is always stable near the target temperature, achieving temperature control accuracy of ± 0.1 ℃ or even higher.

Stable operation: During long-term operation, the reactor cycler can maintain a small temperature fluctuation range, providing a stable temperature environment for the reactor, which is particularly important for some temperature sensitive chemical reactions.

Improving reaction efficiency: Through precise temperature control, the reactor circulation device can ensure that the reaction proceeds at a predetermined rate and direction, avoiding side reactions caused by temperature fluctuations, thereby improving the conversion rate and selectivity of the reaction.

Type and Characteristics:

High precision refrigeration and heating cycler: capable of achieving high-precision temperature control, suitable for chemical reactions with high temperature requirements.

Fully enclosed heating cycler: With a fully enclosed design, it can effectively prevent the leakage of chemical substances, ensuring the safety and hygiene of the operating environment. At the same time, it can also achieve temperature control over a wide temperature range to meet the needs of different chemical reactions.