Low temperature artificial climate chamberIt is a high-precision environmental simulation device that integrates cooling, heating, lighting, and humidity control, designed specifically for scientific research and industrial scenarios that require low temperature and controllable climate conditions.
Programmable control mode; Two different parameter values can be set (daytime and nighttime) (the high-end model can set 30 sets of multi-stage programming parameter values).
Intelligent low-temperature long-term refrigeration anti icing technology and high-temperature PID heating technology; Balancing precision in temperature and humidity control with energy conservation and environmental friendliness.
Selecting compressors and circulating fans, combined with strict and professional refrigeration processes, to ensure the long-term reliability of system quality, allowing users to worry free.
Good design of circulating air ducts, air duct ventilation structure, and equal return air technology; The studio has gentle wind speed and uniform temperature and humidity.
Equipped with power-off memory function, it can continue to operate according to the original set value from the power-off point when powered on again.
Stainless steel inner liner; Adjustable shelf height; The shelf can be directly extracted outward.
Cleaning and disinfection procedures:
Internal cavity cleaning:
Routine cleaning: Use a sterile and dust-free cloth dipped in 75% ethanol to wipe the inner walls, shelves, and door seals every month (chlorine containing disinfectants are prohibited from corroding stainless steel).
Deep disinfection: Use diluted quaternary ammonium salt disinfectant to treat corners and crevices every quarter, remove residues with 70% ethanol, and dry at high temperature for 45 minutes.
Observation window maintenance:
Maintenance of coated glass: Gently wipe with a soft cloth and neutral cleaner, and avoid acidic or alkaline solvents (such as 84 disinfectant) to prevent the film layer from peeling off.
Sealing inspection: Test the resistance of the door gap clamp A4 paper closure. If the difference is greater than 30%, the sealing strip needs to be replaced.