EPED-E-EDI series laboratory ultrapure water machine

Water production index:
Electrical resistivity: 10-17M Ω· cm
Water production: 30-40L/H 50-60L/H 100L/H
Electric power: 100W, 200W, 300W
Recovery rate: 90-95% (when the water quality of the source is high, the recovery rate will be higher)
Size: 450 * 350 * 680 (MM)
Weight: 25-30KG
Power supply: 220V
Note: The detailed water quality and quantity of production will depend on the specific requirements of the customer.

EDI inlet requirements
Water supply: RO produced water, conductivity ≤ 20 μ s · cm (<10 μ s · cm)
PH value: 6.0-9.0 (7.0-9.0, but the hardness should not be too high)
Water temperature: 5-35 ℃
Hardness (calculated as CaCO3): ＜ 0.5mg/l
Organic matter: The maximum concentration is 0.5ppm, and the recommended TOC value is zero
Oxidant: The maximum concentration is 0.05ppm (Cl2) and 0.02ppm (O3), with both being zero
Iron and manganese:<0.01ppm
Silicon dioxide:<0.5ppm
Carbon dioxide:<5ppm
Oil and grease: cannot be detected.




Application fields:
Chemical water treatment in power plants
Ultra pure water for the electronics, semiconductor, and precision machinery industries
Process water for pharmaceutical industry
Preparation of food, beverages, and drinking water
Desalination of seawater and brackish water
Small pure water station, group drinking pure water
Fine chemical engineering and advanced science water use
Preparation of high-purity water required by other industries

The above information is for customer reference only. Please consult the company's business personnel for details.