EPED-RO-EDI Laboratory Ultra Pure Water Machine
This is our follow-upSAGAandEPEDAfter the series, a new heavyweight masterpiece was launched.EPED-R0-EDIThe production of the series of ultrapure water purifiers marks the shift of China's laboratory ultrapure water system manufacturing industry from traditional technology to the concept of "resource conservation and green environmental protection", and also signifies a groundbreaking event in the industrial fieldEDITechnology, in terms of popularizing miniaturization in Chinese laboratories,EPEDSignificant breakthroughs have been made.
EDICleverly integrating electrodialysis and ion exchange technology, using mixed ion exchange resin to adsorb anions and cations in water, and at the same time, these adsorbed ions are removed through the cation exchange membrane under the action of direct current voltage. Due to the simultaneous occurrence of ion exchange, ion migration, and electrical regeneration of ion exchange resins, high-purity water can be continuously produced without the need for acid-base regeneration.EPEDYipu YidaDeveloped and producedRO-EDISeries Ultra Pure Water PurifierCompared to traditional ultrapure water purifiers, it has significant advantages: due to the simultaneous preparation of ultrapure water and resin regeneration by EDI, the operating cost is lower, and it is more environmentally friendly and green; Eliminate the pain of frequent replacement or regeneration, and make operation and management more convenient; The water quality is stable and reliable, and can operate continuously with high quality.
EPED-RO-EDI Laboratory Ultra Pure Water MachineBasic functions
Microcomputer control, waterproof micro touch button control, fully automatic water production
PLCProgramming flushing controller, system automatic/Manual scheduled cleaning
The circuit section is equipped with a shielding installation box to avoid the influence of humid environment on the circuit
Online water quality monitoring system, real-time monitoring of ultrapure water and pure water quality
Power on self-test, automatic maintenance during standby period
Water shortage, full water alarm and switch to self-protection
Optimized structural settings enable real-time monitoring of system power status
Purification column and ultra purification column (optional) replacement warning
automatic/Manual circulation to continuously maintain high-quality experimental water
automatic/Manual control of liquid level, automatic startup when water is low, automatic shutdown when water is full
Fully enclosedAntibacterial type*Design for centralized water supply on an appropriate scale
Personalized upgrade of water quality, quantity, and functionality
Modular and quick connect design for easy installation and maintenance
Timed water intake function0-999minute
Practicality enhanced design, stable performance
Simple and elegant, with a rigorous aesthetic of instruments
EPED-RO-EDI Laboratory Ultra Pure Water MachineExtended features
RS232Interface or485Record the historical water quality situation
Various specifications of pure water tanks
Remote control function
Foot operated water intake switch
Display and cumulative time
Language Switching (Chinese)/English)
Password Settings
EPED-RO-EDI Laboratory Ultra Pure Water MachineProduced water quality
Water intake 1: Ultra pure water meets the requirementsChina<National Experimental WaterGB6682-92Standard>First level water standard, optionalDIThe resistivity can reach up to18.2MCM(25℃)。
Water intake 2: Pure waterin line with China<National Experimental WaterGB6682-92Standard>Third level water standard.
Level 1ROpure watersecond levelROpure water
Conductivity ≤10?s/cm(Source water<)200? s/cm)Conductivity ≤0.5-3? s/cm(Source water<)200? s/cm)
Conductivity ≤15?s/cm(Source water<)400? s/cm)Conductivity ≤1-5? s/cm(Source water<)400? s/cm)
Conductivity ≤25?s/cm(Source water<)800? s/cm)Conductivity ≤2-10? s/cm(Source water<)800? s/cm)
Technical parameters:
| model project | *Combination type | Ultra low available models | Molecular biotype | Trace analysis type | Basic application type |
|
EPED-□R1EC
EPED-□R2EC
|
EPED-□R1EY
EPED-□R2EY
|
EPED-□R1EF
EPED-□R2EF
|
EPED-□R1EH
EPED-□R2EH
|
EPED-□R1E
EPED-□R2E
|
| water production | 30/50/100L/H | 30/50/100L/H | 30/50/100L/H | 30/50/100L/H | 30/50/100L/H |
| Inlet water source | Municipal tap water (in accordance with China's "Drinking Water Hygiene Standards"), inlet pressure: 0.1-0.4Mpa When the quality of the source water is poor, a pre processor for the water source can be added |
| resistivity |
15-17MCM
|
15-17MCM
|
15-17MCM
|
15-17MCM
|
15-17MCM
|
| T O C | 1-5ppb | 1-5ppb | <10ppb | <20ppb | <30ppb |
| bacteria | <1cfu/ml | <1cfu/ml | <1cfu/ml | --- | --- |
| Heat source | <0.001EU/ml | <0.02EU/ml | <0.001EU/ml | --- | --- |
| Particle impurities | (≥0.1?m)<1/m1 | (≥0.22?m)<1/m1 | (≥0.22?m)<1/m1 | (≥0.22?m)<1/m1 | (≥0.22?m)<1/m1 |
| Other | Dimensions: Width * Depth * Height 538 * 536 * 864mm; Power supply: AC 220V/50HZ |
EPED-RO-EDI Laboratory Ultra Pure Water MachineRemarks
Model specification description: Taking "EPED - □ R1EC/□ R2EC" as an example
EPEDTable Brand Name □ Table Water Production L/HR1Table 1: Level 1 Reverse Osmosis
R2Table 2: Secondary Reverse OsmosisETable EDICTable Product Model
EPED-RO-EDI Laboratory Ultra Pure Water MachineApplication scope:
Widely used in research institutes, colleges and universities, disease control centers, drug testing institutes, quality inspection institutes, environmental testing stations, electronics, electricity, etcApplication standard experiments, chemical quantitative analysis, standard solution preparation, blood testing, atomic absorption/emission spectroscopy, tissue culture, etc. in laboratories in industries such as steel, chemical, and pharmaceutical.